Thanks in advance for taking the time and looking.
Ok here is the rundown.
Everything that is installed is in the sig.
After first installation I noticed that I had no tweeter output on the drivers side. The crossovers are mounted in the door panels. So I checked the crossovers and narrowed it down to a bad poly coil in the OZ crossover. I did a quick search on the interwebz and found some new matrix elite crossovers and purchased them.
The crossovers arrive and I start on the drivers side and as soon as I install it I notice that the 6.5 woofer on the passenger side stops playing. WTH??
So I head over to the front stage amp and swap rcas. NO go. I swap channels............no go. I swapped another amp in and still no go. So im pissed right now! I take the passenger side apart and go ahead and swap that crossover also for a new one. No dice. I pull the 6.5 mid outta the door and check the coil and it reads the same as the driver side. So not really knowing what to do I ran a new run of wire from the crossover to the 6.5 mid on the passenger side. Yea that dint work either! So right now I am at a loss. Should I be looking @ the HU? Thanks for your time.
J
Ok here is the rundown.
Everything that is installed is in the sig.
After first installation I noticed that I had no tweeter output on the drivers side. The crossovers are mounted in the door panels. So I checked the crossovers and narrowed it down to a bad poly coil in the OZ crossover. I did a quick search on the interwebz and found some new matrix elite crossovers and purchased them.
The crossovers arrive and I start on the drivers side and as soon as I install it I notice that the 6.5 woofer on the passenger side stops playing. WTH??
So I head over to the front stage amp and swap rcas. NO go. I swap channels............no go. I swapped another amp in and still no go. So im pissed right now! I take the passenger side apart and go ahead and swap that crossover also for a new one. No dice. I pull the 6.5 mid outta the door and check the coil and it reads the same as the driver side. So not really knowing what to do I ran a new run of wire from the crossover to the 6.5 mid on the passenger side. Yea that dint work either! So right now I am at a loss. Should I be looking @ the HU? Thanks for your time.
J