US Amps MD3?

[bumpin_blazer 5,000+ posts]

heh i got the planet audio because the price and sick warranty. I've burnt MMATS amps on thier own subs before. As i said before all a matter of opinion. Power isnt power, your XXX will sound good with that amp no doubt but dont expect to win any SPL comps with it.
I'll have an MD3 within the month for my 06 XXX12

mmats amps perform flawlessly and better than any other brand i've used aside from the c2k 4kw's i owned for a while. if you know how to use them correctly mmats do fine.

 

[95ZJ 10+ year member]

I'm new to doing my electrical system for my subs and speakers...so if anyone can explain what the Big3 Upgrade 1/0 ga w/ 1/0 ga amp kit and 250amp ANL fuse are. Or post a link that will send me in the right direction, it'd be much appreciated.

 

[90accordman 5,000+ posts]

well the fuse it there to blow instead of an amp or somethign else that may be connected to the power line.

A BIG three kinda works like a straw, ******* through a tiny straw only allows so much juice through the straw so the bigger the straw around, potentially the more juice(power). Therefore a bigger wire from your alt to your batt and so forth allows for more power to be distributed

 

[RumbleNTheTrunk 10+ year member]

heh i got the planet audio because the price and sick warranty. I've burnt MMATS amps on thier own subs before. As i said before all a matter of opinion. Power isnt power, your XXX will sound good with that amp no doubt but dont expect to win any SPL comps with it.
I'll have an MD3 within the month for my 06 XXX12

dude you already went with the xxx? **** didnt even give the mx a chance?

 

[RumbleNTheTrunk 10+ year member]

heh i got the planet audio because the price and sick warranty. I've burnt MMATS amps on thier own subs before. As i said before all a matter of opinion. Power isnt power, your XXX will sound good with that amp no doubt but dont expect to win any SPL comps with it.
I'll have an MD3 within the month for my 06 XXX12

if you burnt a 3000.1 id be worried...now a modded hc thats different...

 

[95ZJ 10+ year member]

Alright, where can I buy all of this electrical stuff?

 

[90accordman 5,000+ posts]

dude you already went with the xxx? **** didnt even give the mx a chance?

i was like the first person to have an MX, and i have more then one car as well.

As for the op question, you can get them at most audio stores locally, on ebay, knuconcepts.com (spelling on that) realmofexcursion.com also has a store, or various people on this forum sell the items in the classified section.

 

[dkmesa 10+ year member]

Alright, where can I buy all of this electrical stuff?

http://www.edesignaudio.com/wire_cat.php?catid=48

http://knukonceptz.com/productDetail.cfm?prodID=KOL-AK0

 

[95ZJ 10+ year member]

So what am I looking for when purchasing these items? Any brand names that are notable?

Edit: Thanks a lot man //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif.

 

[90accordman 5,000+ posts]

if you burnt a 3000.1 id be worried...now a modded hc thats different...

i had the older model amps, before RE was out or alot of the other current companies. I'm just the type of person that once i have a bad experience with a company i dont try anythign else.

 

[RumbleNTheTrunk 10+ year member]

i had the older model amps, before RE was out or alot of the other current companies. I'm just the type of person that once i have a bad experience with a company i dont try anythign else.

i had that problem with elevation...

 

[dkmesa 10+ year member]

So what am I looking for when purchasing these items? Any brand names that are notable?
Edit: Thanks a lot man //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif.

KnuKonceptz is one of the best as far as amp installation goes. Since they are out of the 0 ga kit you could just buy the 1/0 ga wire you need, an anl fuse holder, a pack of 250 amp anl fuses, and 1/0 ga terminals

 

[95ZJ 10+ year member]

I figure I'll just take it to my custom sound shop here in town, and tell them to make all the precautionary mods. But I'll bring along the wiring kit from knukonceptz or elemental designs, and ask them to use it?

 

[90accordman 5,000+ posts]

So what am I looking for when purchasing these items? Any brand names that are notable?
Edit: Thanks a lot man //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif.

you want exactly what the one guy posted.

ANL fuse (im not sure on rating youll need)

1/0 guage power wire enough for neg and pos

a holder for the fuse somethign like this

 

[95ZJ 10+ year member]

So pretty much everything on this page?:

http://www.knukonceptz.com/searchResults.cfm?StartRow=11&SearchString=ANL%20fuse#