Lil Poot
5,000+ posts
you sturrin at me brah?
planning on picking up a motor and reconing my 18s to 15s, building another box to run 3 15s. thing is, i want to keep it under the windowline, and if possible i'd like to have the batteries back there also so i can have my whole backseat back.
i'm going to stay with d1 coils, might try the memphis at .67 daily, but i think it will **** too much current. going to sell/trade it off for something that will do that easier daily and run the memphis at 1.5 until then.
i should be gaining output with the added motor strength and gain area, even if i go to a slightly smaller than recommended enclosure, and only adding a little bit of power right? i think i could give them 4 cubes net each. its a 4 door explorer, and i think i'm going to have to build the box or place the batteries over the wheelwheels. i think i have all the batts i need to run a stout amp like a d9 or 40.1 at .67 daily. maybe something slightly bigger, but i'll mostly likely be going from the 4.5kish i run now to 5-5.5k from dropping impedance and changing amps.
i'm going to stay with d1 coils, might try the memphis at .67 daily, but i think it will **** too much current. going to sell/trade it off for something that will do that easier daily and run the memphis at 1.5 until then.
i should be gaining output with the added motor strength and gain area, even if i go to a slightly smaller than recommended enclosure, and only adding a little bit of power right? i think i could give them 4 cubes net each. its a 4 door explorer, and i think i'm going to have to build the box or place the batteries over the wheelwheels. i think i have all the batts i need to run a stout amp like a d9 or 40.1 at .67 daily. maybe something slightly bigger, but i'll mostly likely be going from the 4.5kish i run now to 5-5.5k from dropping impedance and changing amps.