Ummm. Amp Question Pleaseee

[JHardee 10+ year member]

so i have a 4gau. wiring kit running from my battery to my trunk and at the moment i have a little 2 channel amp running my components up front...

i plan on just unhookin the MA amp and hookin up my ed.nine1 for my sub but then how do i also hook up the MA amp for my speakers? like do i need to buy a new kit and run it through my car in the back so i can use MA amp? or.. is there like splitters.. for like remote and rcas and whatnot....

thanks

Click to read more...

 

[dafobbishon3 10+ year member]

you will need a distribution block.

 

[dafobbishon3 10+ year member]

I Read It Wrong Sorry.

 

[DukeNut 10+ year member]

If your hu has an additional set of rca outs, you'll run another set of rcas to the other amp. If you dont have extra hu rca outs, use y adapters or amp passthru if supported by the amps. For the remote just daisy chain it off existing amp.

For power, like dafob said use a distribution block but you may want to think about running 0/1 ga from battery back depending on your amp draws, and then use the block to run 4 ga to both amps.

 

[thegreatestpenn 5,000+ posts]

you need at least a fused distro block, wire for the other amp (power, ground, remote, RCAs)

 

[dafobbishon3 10+ year member]

i have a dist block. but im wondering. if i should upgrade my wires.

because my first amp. initially has 4 awg. but when i got my frontsage amp installed. they only used 8 awg. so should i upgrade my ground and power wire to all 4 awg?