too much power

[doyoshuffle5 10+ year member]

do u think a Hifonics ZXi 3406 wold be to much power for a set of PG Rsd65 components

tryin to match up amps

Click to read more...

 

[jmanpc 5,000+ posts]

what're the power ratings? i'm too lazy to look em up

 

[phyphoestilic 5,000+ posts]

If they are over the power ratings the component set lists than your fine. Cause you can tweak the gains to not put out more power than u need.

 

[doyoshuffle5 10+ year member]

PG's http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=17540

hifonics amp http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16352

 

[doyoshuffle5 10+ year member]

well i dont wanna pay for power i would be wasting or could i just set up my rear fill 6 x 9s as well or would amping them be pointless

 

[doyoshuffle5 10+ year member]

would it be possible to wire up that set of comps and the 6 x 9s on that amp or no

 

[reed dollaz 10+ year member]

bridge the first two channels for the comps and using the remaining two for your 6x9's. it should help with your power issue, the RSD's are 60rms, the amp does 150 @ 4ohm, so it would technically lower the power rating (just a guess)

 

[phyphoestilic 5,000+ posts]

bridge the first two channels for the comps and using the remaining two for your 6x9's. it should help with your power issue, the RSD's are 60rms, the amp does 150 @ 4ohm, so it would technically lower the power rating (just a guess)

what? Than he'll be running his front speakers in a mono setup? WTF would he wanna do that for?

That amp would work, but if u just use 2 channels for the 2 components u'd be under powering them, should still get pretty loud but under powered. But that way u'll still have 2 channels for 6x9's in the back.

Or you can bridge the first 2 channels together for 1 component set, than bridge the 3rd and 4th channels for the 2nd set. But that way u'd have to lower ur gains, and technically u'll be paying for more power than you need. (the 2nd way u wont be able to run the 6x9's for the back)

 

[doyoshuffle5 10+ year member]

whats the best way to wire for my comps screw the 6 by 9s could u show or tell me how i should do it

 

[phyphoestilic 5,000+ posts]

U can either buy that amp and bridge the first 2 channels and than the 2nd 2 channels, or buy a 2 channel amp.

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16325

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16343

something like that if u wanna go cheap.

 

[doyoshuffle5 10+ year member]

zxi 4006 would be the best but so i just wire up the comps like im wiring subs to that amp

 

[doyoshuffle5 10+ year member]

would that be the best bet compared to the multi channel hifonics