Sold Tons of audio accessories wiring, battery and random stuff

Goindef154
5,000+ posts

Nothing
Rating: 100%
23 0 0
I have a bunch of random accessories and wiring that have just been sitting around collecting dust and I'm not gonna have a use for them. Pretty much everything is OBO. And I'll do combined shipping on things of course. Here it goes:

I have a 13 1/2 foot length of 1/0 gauge welding wire it's a little older meaning that there's actual copper in it. I'll sell it for $30 shipped

DSC04571.jpg


DSC04563.jpg


DSC04562.jpg


DSC04572.jpg


Next I have a few runs the 2 bigger ones are about 2 1/2 feet and have ring terminals on one end of each and the other two are about half that, one with ring terminals on both ends and one with a ring terminal on one end, the one with ring terminals on two ends has the wire kind of twisted up inside the jacket, nothing major but just wanted to point it out. The red bus bar in the picture is not included in the $20 shipped. I'll ask $20 shipped, but shoot me an offer

DSC04565.jpg


DSC04566.jpg


6 runs of red 4 gauge power wire, it's not the highest strand count but it's not the worst, the longest is 4 1/2 feet and 2 others that are about 6-8 inches shorter and the other ones are about 2 feet and the short one is about 1 foot. $20 shipped OBO.

DSC04587.jpg


4 small runs of Knukoncepts KLM 4 gauge blue wire, the long one is about 3 feet and the other are about 2 feet each. $12 shipped OBO on those.

DSC04586.jpg


Red 8 gauge power wire, I have a whole roll of it, not sure how much is in the roll, but I'll sell it for $0.35 a foot.

DSC01905.jpg


 
Raptor 1/0 gauge ANL fuse holder with digital volt meter, one or 2 of the lights in the volt meter don't work. $13 shipped.

DSC04579.jpg


4 1/0 gauge ring terminals, $1.00 each or $5.00 shipped for all four

DSC04584.jpg


Anl fuses, $2.00 each or make an offer for all.

DSC04583.jpg


 
Lastly, I have a battery that I've owned for a few years, it maintains a 12.5 charge and higher usually, I honestly have no idea what cells are inside or anything, I bought it for about $350 before I knew much about batteries and it was custom built the measurements are 10 1/2Lx5 1/2Wx7T and it weighs about 60 lbs. I'll ask $150 for it but make offers and ask questions and I'll try to answer them.

DSC04588.jpg


DSC04589.jpg


DSC04591.jpg


DSC04590.jpg


That's all I have for now, I might add more stuff later. I have tons of Ref's on here and other sites, if you need a piece of paper with my name and stuff just ask. Again everything is obo and I'll obviously do combined shipping on a lot of stuff. Thanks for looking.

 
I want the following items

2 Distribution blocks with 2 1/0 gauge inputs and 4 4 gauge outputs I'll ask $15 shipped EACH and $25 shipped for both.

4 1/0 gauge ring terminals, $1.00 each or $5.00 shipped for all four

I have a 13 1/2 foot length of 1/0 gauge welding wire it's a little older meaning that there's actual copper in it. I'll sell it for $30 shipped

could you cut me a little slack on the $ and ship them all together?

I'll pp you PM you PP addy

 
I kid at work might be interested in the volt/fuse. Does all the numbers work? Don't care about lights, just as long as the number work //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Goindef154

5,000+ posts
Nothing
Thread starter
Goindef154
Joined
Location
Phoenix, AZ
Start date
Participants
Who Replied
Replies
58
Views
2,912
Last reply date
Last reply from
Goindef154
IMG_20260506_140749.jpg

74eldiablo

    May 22, 2026
  • 0
  • 0
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top