To Alaxan

[Wonderbread 5,000+ posts]

he is running it bridged at .5 ohm, correct Alaxan?

so the positive of one adn the negative of the otehr...

edead, raamat, brown bread, ice gaurd roofing stuff, basically the same as dynamat orignial, can be a pain to apply...

 

[Alaxan 5,000+ posts]

Originally posted by Wonderbread he is running it bridged at .5 ohm, correct Alaxan?

so the positive of one adn the negative of the otehr...

edead, raamat, brown bread, ice gaurd roofing stuff, basically the same as dynamat orignial, can be a pain to apply...

Correct it is bridged. The two channels act as a mono amp now instead of stereo

 

[Wonderbread 5,000+ posts]

hee hee!!

im learning! lol.

a few months ago i couldnt tell ya the difference between parallel and series, as well as stereo and bridged...

lol.

 

[Steven 10+ year member]

Alaxan:

From the sounds of things you are running your amp at .25ohm/channel (if I understand you properly). I'd just like to say congratulations, Not many amps would hold up to that !

2 - 2ohm dvc subs wired in parralell = .5ohms

Amp is bridged, so each channel basically sees half the load (not accurate, but reasonable description)

.5ohms X 1/2 = .25 ohms

WOW.

 

[Alaxan 5,000+ posts]

Originally posted by Steven Alaxan:

 

From the sounds of things you are running your amp at .25ohm/channel (if I understand you properly). I'd just like to say congratulations, Not many amps would hold up to that !

 

2 - 2ohm dvc subs wired in parralell = .5ohms

 

Amp is bridged, so each channel basically sees half the load (not accurate, but reasonable description)

 

.5ohms X 1/2 = .25 ohms

 

WOW.

Each channel sees .25, but bridged sees .5ohm. as they then act internally even as one channel in a series.

 

[gunny86 10+ year member]

alaxan could you tell me what size those component speakers are? and w\how many watts total are you pushing on the subs and components thanks

 

[Alaxan 5,000+ posts]

Originally posted by gunny86 alaxan could you tell me what size those component speakers are? and w\how many watts total are you pushing on the subs and components thanks

The components are 6.5" and are receiving about 50watts RMS a piece. The subs are dividing up right now a total of 2400watts.