Thumbs up cab 1600

[My63bug]

2 icon 12s

 

[Lbetts818]

That zapco would be amazing. I'm to poor lol to afford something like that. Eventually want to updgrade to a crescendo encore 4.5k. Want to meter first and see. And sub and port up was way to go thanks @hertzmafia for the help on design. Moves a toooon of air. Can do some wicked hair tricks already

---------- Post added at 09:43 PM ---------- Previous post was at 09:43 PM ----------

That zapco would be amazing. I'm to poor lol to afford something like that. Eventually want to updgrade to a crescendo encore 4.5k. Want to meter first and see. And sub and port up was way to go thanks @hertzmafia for the help on design. Moves a toooon of air. Can do some wicked hair tricks already

 

[BOOMINGRANDPA 5,000+ posts]

2 icon 12s

so u want something like 1500 or more per sub and not to long of an amp and $349 or less each (that's what the zapco is)? or 1 3-3.5k amp maybe?? look at the xtr amps i'll see what else I can find..

 

[wew lad 5,000+ posts]

[quote name='Hertz Mafia']How is 18"x8" big ?[/QUOTE]

the size of my banda 7k you mean?

@Lbetts818 go brazilian

 

[My63bug]

Im only getting 1 amp for the pair. And prob 400watts for components. With the this

http://www.woofersetc.com/st-4x-p-zapco-4-channel-480w-rms-class-ab-amplifier.html?gclid=CjwKEAjwutXIBRDV7-SDvdiNsUoSJACIlTqlDxkaULKIFdgThoiwA3ulUcyWIbcgsE3hLwMK6J06zBoC3dXw_wcB

unfortunately im governed by a 95 amp alt. No one makes a bigger one. Im gonna be pushing it with 2k total

 

[Lbetts818]

I'd love a taramaps bass 5000. Gonna beat the heck out of these for the summer while stacking up some coin and tax time buying a solid amp with some refund and savings. By then may be ready to recone and basket to 18s and wall it off....

 

[Lbetts818]

Im only getting 1 amp for the pair. And 200 to 400watts for components...im unfortunately governed by a 95 amp alt. No one makes a bigger one

Look into lithium batts. Some like to be charged at a lower rate I do believe.

 

[BOOMINGRANDPA 5,000+ posts]

oh so are the d2 or d4, other words u want 1500-2k @1ohm? ts 2.8k is $629 but u don't want that much the ts 1.3k is $289., the 1.8k is $399

 

[Lbetts818]

I wish I could somehow dyno or measure how many watts I'm getting at two at .5

 

[Hertz Mafia]

I wish I could somehow dyno or measure how many watts I'm getting at two at .5

MOB show on the 20th... it's a big show. U can get clamped there. My buddy Kenny has the magnums termlab

 

[Lbetts818]

Yeah my buddy Corey already told me but gotta man down a lame *** garage sale for the wife this weekend. Plus lil bros b-day. I'll see what I can try and do. Where's it located?

 

[My63bug]

oh so are the d2 or d4, other words u want 1500-2k @1ohm? ts 2.8k is $629 but u don't want that much the ts 1.3k is $289., the 1.8k is $399

1d

 

[shredder1 10+ year member]

Well , I've had my issues with the CAB amps.. "possibly caused by me"... Mine was warrantied with no problem... For $200 it's almost a throwaway amp but since that happened I've loaded mine at 2 ohms each and tuned a little lower..."28 hz" and even though I'll tear it all apart someday eventually for sure... I'd recommend these amps to anyone tryin' to save a buck! With the current setup you just cant listen to decaf at high volume for more than a minute at a time... it may not hit big SPL but playing some slowed and lows it kills it for a couple of 12's. Also be ready to upgrade the electrical and dampen the car for sure. 1/2 ohm each may cause problems because strapping into 1 ohm is not recommended but insane power if you manage to not have the amps go into protect... Good Luck! The closeup of the black amp was the board shifting in the heatsink..Don't think you can load these at LOW impedance and they'll last... It could have been mounting it on the original box I had that caused this, but I digress... Mind you these amps never went thermal one just quit one day! Remember that 2 of these strapped @ 2 ohms is +3000 watts, if you got the electrical tight! For $200 ea it's a great deal...

 

[BOOMINGRANDPA 5,000+ posts]

1d

d1 coils? so u can wire 2 ohm, each = 1 ohm.. and u want like 800 or so per sub?

 

[My63bug]

That was my plan. Did not mean to thread Jack

I just want more loud. Right now I'm currently running 1 Icon 12 D2 wired to 1ohm. A 1200 watts. And 2.5 cubes. 30hz.. the plan is another icon 4.5 cubes. 35hz. 800watts apiece.. I hope it gets a little louder