Three W3-D6 JL's

[JLa Obsessed 10+ year member]

http://mobile.jlaudio.com/support_pages.php?page_id=161
midway down, right side...

Thank you very much I was just about to post that! lol...yeah the D6 voice coils are nice, you have alot of options when it comes to what ohm load you want //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

JLa FTW!

 

[Bimmerdriver 10+ year member]

alright so now i must decide whether these really would be all that much better than the d3's

 

[80INCHES 5,000+ posts]

K but any initial response..
Will be run off of my KAR 900.1D amp... ( I don't know if these would be good for that amp)

u need around 5-600watts 2 see any real potential from those w3 subs

80

 

[Bimmerdriver 10+ year member]

u need around 5-600watts 2 see any real potential from those w3 subs
80

yeah and? My amp puts out 1000w rms at 1ohm

 

[casper97ta 10+ year member]

He means per woofer. I used to give my 12w3 v1 a good 800w no problem.

 

[Bimmerdriver 10+ year member]

**** son that much power? haha

 

[Bimmerdriver 10+ year member]

so he says 190 is the lowest he can go? Still worth it? Or are my diamonds enough? Should i build a ported box for my diamonds (I have never built a box before)

 

[Kold_Killa 10+ year member]

Yes, porting the diamonds would probably help... Building a box is not that hard... especially if you have a cut sheet and have Home Depot do all the cuts so that all you have to do is glue/screw it together...

This site will let you input dimensions and give you a cutsheet:

http://www.subwoofertools.com/forum/ported-box.asp

 

[Bimmerdriver 10+ year member]

Yes, porting the diamonds would probably help... Building a box is not that hard... especially if you have a cut sheet and have Home Depot do all the cuts so that all you have to do is glue/screw it together...
This site will let you input dimensions and give you a cutsheet:

http://www.subwoofertools.com/forum/ported-box.asp

is this what a lot of people use?