Three W3-D6 JL's

[Bimmerdriver 10+ year member]

Well I don't know I am just going off what the guy told me...

JL W3 D6 was what he said. you can see in the craigslist add posted above

 

[Bimmerdriver 10+ year member]

Wait nm it awsn't in the add but he said this

w3-d6 dual voice coils

 

[528hz 10+ year member]

dual 6 ohm

 

[Bimmerdriver 10+ year member]

what are these actually worth? what should i offer? 150?

 

[Bimmerdriver 10+ year member]

Your amp is only 1 channel... it may have two sets of terminals and is then bridged internally....

Ok would i use both terminals ont he amp or only one?

 

[Kold_Killa 10+ year member]

Just do one negative of one and one positive of the other.....

 

[Bimmerdriver 10+ year member]

so one neg off of one channel and one pos off of the other channel... cause on the amp it doesnt have the usual like line that says bridge and points to the pos and neg... so i don't know...

right now i am running my subs one off of one channel adn the other off of the other one

 

[Kold_Killa 10+ year member]

so one neg off of one channel and one pos off of the other channel... cause on the amp it doesnt have the usual like line that says bridge and points to the pos and neg... so i don't know...
right now i am running my subs one off of one channel adn the other off of the other one

Yes....

And just to clarify, it is not a separate channel but just a separate terminal... I know what you mean tho //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Btw, what they are worth, I would say $150 would be a nice price... $175 would be about avg, and $200 would be above average, but still decent if they are in good condition... because I'm at work I can't look at craigslist.

 

[Bimmerdriver 10+ year member]

what difference does it make then doing it that way or just using the positive and negative off mono channel A and putting nothing in B

 

[Kold_Killa 10+ year member]

I would think half the power, but can't say I have ever done it... no point....

 

[Bimmerdriver 10+ year member]

maybe if i built a ported box for the diamonds. you think me and my dad could do that? I am only 17 and don't know too much about wood or woodworking but he knows a little

 

[Bimmerdriver 10+ year member]

i am going to go check it out later....

but i am not going to bring money with me because i already have way too many subs and i only need to buy if i really like em...

i have two alpine type e 10's one diamond d3 12 in a q logic box and two diamond d3 12's in a sealed box plus an alpine amp, mb quart 6x9's and BSW mids for BMW's.... too much shit all for sale

 

[Bimmerdriver 10+ year member]

So i went and yes they are the 10 W3 D6's and we hooked them up to my amp but the thing is one of the subs had alot more excursion than the other two and it wasn't near as loud as my diamonds...

So i pulled all the subs out and tried to find info online like on rockfordfosgate.com but they don't have wiring diagrams for three DVC 8ohm subs to a 1 ohm mono stable amp... I couldnt find anything out..

They had the subs hooked up like positive to minus on every of the subs with its own voice coils and then positives running down one side and neg running down the other

 

[Bimmerdriver 10+ year member]

+1

 

[Kold_Killa 10+ year member]

http://mobile.jlaudio.com/support_pages.php?page_id=161

midway down, right side...