this making me wanna throw my crap away!

[mike dressure 10+ year member]

ill get it figured out! thanks for the help guy's

 

[James Bang 5,000+ posts]

i don't get how that one channel amp can be bridged.

the specs say: 400x1@4 800x1@2 1000x1@4

how is there 2 different rating for 4ohms?

 

[nismos14 5,000+ posts]

well my 3002 spl wont get loud and doesnt move much. but i tried a punch hx2 with the same box and same amp. it is being overpowered and bottom's out bad. over excurt's a lot also! the rf is at a 2 ohm load(800 rms) and the 3002 is at 4 bridged(1100 rms). im not getting it.....//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

I threw 1150 rms to my HX2 no bottoming out LOUD as hell in 1.5 ported tune dto 30.

Maybe you need a POWER HX2, I'm selling one //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[mike dressure 10+ year member]

i don't get how that one channel amp can be bridged.
the specs say: 400x1@4 800x1@2 1000x1@4

how is there 2 different rating for 4ohms?

it is bridgeable that is how there is 2 different rating's. and by the way it is 1100 rms

 

[mike dressure 10+ year member]

well it is def bottoming out

 

[nismos14 5,000+ posts]

Whats the amp's gain at. I think you need to turn it down. The sub is probably loud as hell but over-powered for some ODD reason.. I don't understand it thoug cuz mine never bottomed out. I have an HX2 D2 available too if you need.

 

[James Bang 5,000+ posts]

it is bridgeable that is how there is 2 different rating's. and by the way it is 1100 rms

would you happen to have the manual for that amp. 'cause i don't get how a mono block can be bridged (without strapping it to another amp)

 

[nismos14 5,000+ posts]

I think someones confused. It isn't BRIDGEABLE perse... but it can be wired to 2 ohm so he's got the sub wired mono but it's still not bridgable unless it was modded.

 

[mike dressure 10+ year member]

lol no it is bridgeable! say's it in the manual.

 

[mike dressure 10+ year member]

it is a 2 channel mono block. lol best way i can put it.

 

[mike dressure 10+ year member]

well i did some testing and the amp doesnt do 1100 rms at 4 bridged! it does the same as when not bridged at 4 ohm's. so this is why my amp is underpowering it.

so to set the amp straight it does 800 rms at 2 ohms and 500 rms at 4. it is bridgeable but doesnt make a differance! ive been told lies by the manual

 

[nismos14 5,000+ posts]

Lol I still think you need to go with the power hx2 //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif IN the box you have it'll wang //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[mike dressure 10+ year member]

ive got more the enough sub's lol. i need new amp

 

[nismos14 5,000+ posts]

If you think the HX2 is loud the POWER is mental //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Seeeeeeeeeeelll your other subs hehehhe.

 

[mike dressure 10+ year member]

lol it isnt loud it is just louder then the pioneer was with the power given. ive had the power hx2 and loved it. but i dont need more subs