The new mag is xbl :D

[Brassler07 10+ year member]

no... pictures?

 

[Electrodynamic 10+ year member]

The prototype hasn't arrived yet, and I'm not letting out all of the information quite yet. However, there is a nice drawing or two of the basket over on audiojunkies. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[azbass 5,000+ posts]

but I don't want to go to audiojunkies

now I can see where car audio junkyard came from

 

[Electrodynamic 10+ year member]

Ok, here's the image*:

*remember that those are technical drawings and the finished driver will look much better.

 

[denim 5,000+ posts]

We all know that this is the REAL secret:
Woofer Quality = (Excursion x Cowbell) / Quantity of Elemental Designs present

So... you can make up for lack of excursion with more cowbell... or by taking some of the ED out //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Nick uses more cowbell... and don't forget the other equation that is critical: Cowbell = Fibutron + Cowbell Alloy Content -- Nick uses more Fibutron than Cowbell Alloy to achieve the same amount of Cowbell... very complicated.

It's a JOKE //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Before this thread goes horribly awry *laughs*

Don't forget the purity of the alloy, and the size of the cowbell are two ratios that are taken into account. But seriously, first song tested on the prototype should be "Don't Fear The Reaper" - BOC. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[denim 5,000+ posts]

but I don't want to go to audiojunkies
now I can see where car audio junkyard came from

Care to enlighten the rest of us?

 

[Immacomputer 10+ year member]

Ok, here's the image*:

*remember that those are technical drawings and the finished driver will look much better.

As long as the basket doesn't look like this:

 

[Electrodynamic 10+ year member]

No, it won't look like that.

...man that's hideous.

 

[Immacomputer 10+ year member]

Exactly. The concept of the new Mag sounds very appealing but the drawing I saw on audiojunkies made me think of that Legacy driver making me instantly vomit. Hopefully it looks much better than that.

 

[fwb_1234 10+ year member]

Whats the color scheme of the basket, motor, and spider? Will it be pretty enough mount exteriorly?

 

[fwb_1234 10+ year member]

ok

 

[audioholic 5,000+ posts]

Ok, here's the image*:

*remember that those are technical drawings and the finished driver will look much better.

Are you sure you should post that pic here? Someone from eD might see it. lawl

 

[Pyro_By_Nature 5,000+ posts]

Hmmmm, I'll definently be looking foward to the release of this mag. Sounds perfect for my application.

 

[negative3five 10+ year member]

BM basket pics are on SSA I would post them here for you guys but i'm in a hurry...

 

[fwb_1234 10+ year member]

Here is the BM basket.

Quoted from SSA:

As most of you may know, the BM's are going ultra-shallow! Ultra-shallow being 3.5" for a 12" model. The new BM will be offered in a 12" only with dual 4 Ohm coils. Enclosure sizes are 0.75 cubes sealed and 1.5 cubes ported. Power handling will be 500 watts RMS.
That's all the information I'll let out for now, but here is a picture of the basket we are going to use (and before anyone asks, this may or may not be the color of the basket smile.gif)