DJ Nitrous 427 10+ year member
Flunkie
I measured the T/S parameters myself for this sub and plugged them into TermLab's box program. It wont let me screen capture the response graph but here are the numbers :
-3.0 db : 14.5 hz
0.0 db : 18.5 hz
3.3 db : 20.1 hz
4.6 db : 22.0 hz
4.7 db : 23.1 hz
4.8 db : 27.8 hz
4.9 db : 30.5 hz
4.9 db : 32.0 hz
4.8 db : 33.5 hz
4.7 db : 35.1 hz
4.6 db : 36.8 hz
4.0 db : 42.3 hz
3.5 db : 46.4 hz
3.0 db : 50.9 hz
2.6 db : 55.0 hz
2.0 db : 64.0 hz
1.5 db : 73.9 hz
So:
Cutoff : 17.5 hz
0 db : 18.5 hz
3 db up : 20 hz
~ 4.8 db plateau : 22hz to 36.8 hz
slope back 3db up : 50.9 hz
According to the program (2) 6" aero 6" long would give me the tuning I want with a vent velocity of ~8%. You think thats enough port area?
-3.0 db : 14.5 hz
0.0 db : 18.5 hz
3.3 db : 20.1 hz
4.6 db : 22.0 hz
4.7 db : 23.1 hz
4.8 db : 27.8 hz
4.9 db : 30.5 hz
4.9 db : 32.0 hz
4.8 db : 33.5 hz
4.7 db : 35.1 hz
4.6 db : 36.8 hz
4.0 db : 42.3 hz
3.5 db : 46.4 hz
3.0 db : 50.9 hz
2.6 db : 55.0 hz
2.0 db : 64.0 hz
1.5 db : 73.9 hz
So:
Cutoff : 17.5 hz
0 db : 18.5 hz
3 db up : 20 hz
~ 4.8 db plateau : 22hz to 36.8 hz
slope back 3db up : 50.9 hz
According to the program (2) 6" aero 6" long would give me the tuning I want with a vent velocity of ~8%. You think thats enough port area?