T/S parameters for a memphis 15-M3MOJO15Q

[Boominburban]

Any body have these?? Thought I would ask here before I call Memphis. It's the quad coil M3 15" with the orange cast basket that looks like "M's" ....

I already know a recomended vented box is 4.5 @ 35hz. But I still want to throw into my term pro, and see what I can do with it ...

Click to read more...

 

[Boominburban]

Nobody, really ...... I thought someone here would have these ....

 

[AGame615]

on the website you can download the pdf for all discontinued and new products

 

[Boominburban]

Yep, you can. And that would be great if it were more than just a box recommendation pdf. No T/S parameters there bud .....

 

[LosIsATool 5,000+ posts]

Your going to have to call them but I doubt they will have it. If not just go 5 cubes with 14-16sq inches of port per. That's normally the sweet spot for 15s anyway

 

[Boominburban]

Your going to have to call them but I doubt they will have it. If not just go 5 cubes with 14-16sq inches of port per. That's normally the sweet spot for 15s anyway

Yea, 4.5^3 @35 hz is their recommendation. But I really like to tweak and tune my stuff in term pro. Also like to model an HO bass labyrinth design, and see how it would work....

 

[AGame615]

Yep, you can. And that would be great if it were more than just a box recommendation pdf. No T/S parameters there bud .....

my bad, could have sworn they had parameters also ..guess thats just for the newer line

 

[Boominburban]

Yea, you would think so, but it is just a list of discontinued drivers and sealed/vented enclosure and port recommendations ....

 

[los33]

Fs 31.30 Hz

Re 3.06 Ohm

Qms 5.51

Qes 0.56

Sd 800.0 cm2

Vas 66 l

Xmax peak 15.88 mm

Sent from my Z970 using Tapatalk

 

[Boominburban]

Any chance you have QTS spec??

 

[los33]

Heres and updated spec that i had saved, so disregard my last post:

Fs: 31.39 hz*

Qms: 5.51*

Vas: 2.356 cu. ft*

Cms: 73.4 um/N*

Mms: 352.2 g*

Xmax: .625*

Sd: 124 sq in*

Qes: .43*

Re: .765*

Z: 1*

Pe: 1000*

Qts: .39*

Dimensions:*

OD: 15.25*

ID: 14.25*

Depth: 9.25*

Magnet: 8" across

Sent from my Z970 using Tapatalk

 

[Boominburban]

Yea, now that sounds like what I remember, thanks man !!