Flamin_D_Audio 10+ year member
Junior Member
This is my first t-line build and its insane getting to grips with all the parameters!
The line is tuned to 30hz, and the chamber is 0.6 cubes. the line goes from 2" wide to 5" wide as shown:
Some issues i think i have are:
- the chamber is too large
- the box volume is too big
- the expantion of the line is too great
The drivers ill be using to start with probably arent well suited for t-line enclosures; but theyre only temporary until i can afford some RE8s which look good for this purpose.
Any advice on this build would be great!
Sam
The line is tuned to 30hz, and the chamber is 0.6 cubes. the line goes from 2" wide to 5" wide as shown:
Some issues i think i have are:
- the chamber is too large
- the box volume is too big
- the expantion of the line is too great
The drivers ill be using to start with probably arent well suited for t-line enclosures; but theyre only temporary until i can afford some RE8s which look good for this purpose.
Any advice on this build would be great!
Sam