Suggestion Thread

[DonH 5,000+ posts]

Alright so right now in my truck i have the big 3 done with 1/0 hyperflex and 4awg running back to my fusion ppam2000.1 powering my 12's. subs are currently wired to ~4ohms. soon i will be running an 18 and will require the amp to be ran at ~1ohm. Currently full tilt my voltage drops to around 13.5v at idle, but never below that w/o headlights on. at night with headlights on it drops to around 12.7v full tilt at idle. keep in mind this is with the amp @ 4ohms.

With that said, please point me in the right direction of any sort of battery that will be sufficient for 1200-1400 rms daily. I know right now w/o a second battery it will most likely drop WAY to low. so please suggest away! give me any sort of info that will be beneficial for me to keep a nice steady 14v.

Thanks,

-Don

D.H. Designs

EDIT:

Im going to be running 1/0 runns to the back to replace the 4awg //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

Click to read more...

 

[chase007 10+ year member]

I know you really dunt like me, but I have a kinteik 2400hc for 180$shipped about 8 months old...Holds a 12.8-9 charge

 

[cj407]

could use some 0 gauge runs to the back....instead of those small 4 gauge ones...

 

[DonH 5,000+ posts]

I know you really dunt like me, but I have a kinteik 2400hc for 180$shipped about 8 months old...Holds a 12.8-9 charge

i saw ur fs thread earlier. im not a fan of used car audio thou :/ mainly batts and amps sry but i will def. keep u in mind bro!

 

[DonH 5,000+ posts]

could use some 0 gauge runs to the back....instead of those small 4 gauge ones...

had that planned //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif 4 got to mention that //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[DonH 5,000+ posts]

ttt for suggestions peep!