Subs for 2 Rockford bd1001 2002 models?

bigbodyla
10+ year member

Junior Member
I currently have 2 rockford bd1001 putting out about 1200 watts each and I am looking for some 12's to match them with. The amps are 2 ohm stable so I would need a dual 4ohm sub. Any suggestions.? Oh by the way I have a 2 cubes of space for each sub in my enclosure which is slot ported to 30hz.//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif I was going to go with the t2's but don't know anymore after reading the threads on this site.//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

 
No budget! Just looking for something solid. My electrical system consist of 1 yellow top battery, 5 farad alumapro capacitor, 1/0 wiring, big 3 wiring and stock alternator (about 120amps). I really need some subs though!! Any suggestions?

 
I just sold my hx2's because they were not enough! I am looking between sq and spl. This car will be a daily driver. With my old hx2 setup I did about 130 on the meter, ask which one I am not sure. A friend of mine has one and at the time it was the latest one. I am looking to do about 140 or close to it!//content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif Remember my amps are only stable to 2ohms, take that in to suggestion!

 
if 2 rf's hx2's with 2300+wrms were only doing 130 then something must be wrong.

I think that your boxes are not big enough for the hx2's IMO - i would do 2.5cubes and tune them a little higher like 33hz-35hz but that's just me.

 
yea i would deff change up the box thats what i do, when i get tired of my setup i build a new box... two rf hx2 12s should at least break 144 on a burp which is alot louder than 130...

 
I did not have the power hx2's just the regular dvc's. rms 500 peak 1000. Is that what you are refering to? I have heard these subs in just about every box but I just want more. I am an addict!!!!//content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif I was looking at the fiq's and tc's but my amp can only wire to 2 ohm's. Dual 1ohm coils can be wired to what config, I am not sure? Can they get to 2ohms??//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

bigbodyla

10+ year member
Junior Member
Thread starter
bigbodyla
Joined
Location
miami
Start date
Participants
Who Replied
Replies
8
Views
703
Last reply date
Last reply from
bigbodyla
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top