sub question
- Thread starter unregistered
- Start date
- Replies 1
- Views 2K
-
1Participant count
-
Participant list
-
mykeys 10+ year member
URABUS
If you dont frive your amp to clipping your subs should be fine..If you want to test the waters start with your gains set low.. After a few weeks then tune it the way it should be.
Mike
Mike
Activity
No one is currently typing a reply...
Similar threads
One or two, they are still subwoofer outs and are mono summed signals from both left and right. Even the 2 RCA subwoofer pre-outs on the 2nd one...
- Started by kanihoncho
- Speakers
If you are using the RCA level inputs, it will be P&P.
- Started by crackadia22
- Subwoofers
I would run a pair of 15s in an suv.. or run 4) 12s
- Started by ThxOne
- Subwoofers 2
1.25 NET cubes. You have to add the sub and port displacement to the box. I'm guessing that you will be around 1.7 net before sub and port...
- Started by BASSAHOLIC22
- Enclosure Design & Construction
I swapped out a water-damaged amp from a '73 Mercury Cougar and wired four speakers (2 frnt Door/2 rear door panel) as shown here, but did not...
- Started by edpdx50
- Wiring, Electrical & Installation
About this thread
New threads
-
-
-
-
-
Fuse Taps at 30amp with 16AWG....- Started by Paul Curtis
- Replies: 11