stupid aero question

[skadude016 5,000+ posts]

for 3.8 cubes which would work better 3 4" aeros or 2 6" aero's? If I can get away paying alot less i wanna do that. the tuning will be 46hz. thanks guys

Click to read more...

 

[Lakota 5,000+ posts]

Incomplete sentence ftl?

 

[skadude016 5,000+ posts]

Incomplete sentence ftl?

//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif i fail at life

 

[djman37 5,000+ posts]

go to the psp-inc site and see what you can fit. more ports= longer ports.

 

[skadude016 5,000+ posts]

go to the psp-inc site and see what you can fit. more ports= longer ports.

ya i came up with Flare Length Port required 10.71 for 3 4" ports

and Flare Length Port required 15.56 for 2 6" ports.

Would I see a big decrease if i went with the four?

 

[skadude016 5,000+ posts]

also if im just going to duct tape where the connections are. are the connection rings even needed? and the last stupid question. what is the mounting diamater for one 4" PSP and one 6" PSP. thanks guys. I know nothing about aero's lol

 

[djman37 5,000+ posts]

also if im just going to duct tape where the connections are. are the connection rings even needed? and the last stupid question. what is the mounting diamater for one 4" PSP and one 6" PSP. thanks guys. I know nothing about aero's lol

psp 4" ports, you just draw a circle on using the bottom as a template! easy.

for the psp 6" ask chevyaudio, I forgot what we had to do //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[skadude016 5,000+ posts]

psp 4" ports, you just draw a circle on using the bottom as a template! easy.
for the psp 6" ask chevyaudio, I forgot what we had to do //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

sounds simple //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif. so should i jus not get connection rings? will 3 4"er's hurt numbers by a considerably amount compared to 2 6"er's? also i swear last question lol. when it says Flare Length Port required 10.00" is that 10 inches from end of flare to end of the other flare. or is it from box to the end of the flare? thanks

 

[djman37 5,000+ posts]

sounds simple //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif. so should i jus not get connection rings? will 3 4"er's hurt numbers by a considerably amount compared to 2 6"er's? also i swear last question lol. when it says Flare Length Port required 10.00" is that 10 inches from end of flare to end of the other flare. or is it from box to the end of the flare? thanks

i measure port length, flare and tube.

 

[skadude016 5,000+ posts]

i measure port length, flare and tube.

ok got it so from mounting flare to external flare. does anyone know if the connection rings are needed, if im just going to duct tape around the tube and port flare? Should I got with 4 4" ports for more deebeez or should 3 suffice? Thanks alot Djman your saving me so many headaches

 

[djman37 5,000+ posts]

ok got it so from mounting flare to external flare. does anyone know if the connection rings are needed, if im just going to duct tape around the tube and port flare? Should I got with 4 4" ports for more deebeez or should 3 suffice? Thanks alot Djman your saving me so many headaches

use the rings and 2" duck tape. I use aluminum HVAC tape!

 

[Chevyaudio 5,000+ posts]

The 4 inchers mount easy...just draw the inside flare circle and and cut.

the 6" are like everyother 6" port. You cut the circle that is a few inches smaller than the flare. and then you reach in the box and assemble the ports.

and technically, you subtract an inch from the overall length of aeroports for the flares. So if your ports are 18" long TOTAL you have 17" of useable port.

 

[skadude016 5,000+ posts]

The 4 inchers mount easy...just draw the inside flare circle and and cut.
the 6" are like everyother 6" port. You cut the circle that is a few inches smaller than the flare. and then you reach in the box and assemble the ports.

and technically, you subtract an inch from the overall length of aeroports for the flares. So if your ports are 18" long TOTAL you have 17" of useable port.

ok so say it says Flare Length Port required 10.71 then i would need 11.71 total inches from flare to flare right?

 

[PSturmer 10+ year member]

6'' for sure. 1 six is better than 2 4's

 

[PSturmer 10+ year member]

also if im just going to duct tape where the connections are. are the connection rings even needed? and the last stupid question. what is the mounting diamater for one 4" PSP and one 6" PSP. thanks guys. I know nothing about aero's lol

duct tape does not work well holding the ports together. this is what i did for now untill i put in a tube inbetween them.

this seems to work very well.