Stock dash speaker question (Simple)

tr10av
10+ year member

Senior VIP Member
I have some Alpine coaxs in my doors that are amped but they are currently not on due to some remodeling of my car so when I drive all I have are my dash speakers which when I play my HU at volume 30 or so are very scratchy, distorted etc. They sound like extra stinky crap. But when I have my Alpines playing I can crank it to 40 and not hear any distortion, fuzzy sounds or anything coming from the dash speakers.

Why is that?

 
Im guessing if the dash units aren't amped the alpines get louder so you can't really hear thr crappy sound from the dash when you crank it. The distortion doesn't just go away or anything. When I changed my setup and bridged my Eclipse amp to my Hertz HSKs in front and left my rears off the head unit it sounded perfect then when I cut the front speakers and listened to the rear I realized they were ridiculously distorted at high volume levels due to lack of power and would probably blow without me ever knowing. Eventually I ended up with an HU with a little more control over the individual channels so I was able to give them a higher crossover in addition to attenuating them a bit.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

tr10av

10+ year member
Senior VIP Member
Thread starter
tr10av
Joined
Location
Miami, FL
Start date
Participants
Who Replied
Replies
1
Views
573
Last reply date
Last reply from
eharri3
IMG_20260513_214311575.jpg

ThxOne

    May 13, 2026
  • 0
  • 0
IMG_20260513_213956814.jpg

ThxOne

    May 13, 2026
  • 0
  • 0

New threads

Top