static in right front speaker set...

bodine76

Junior Member
I have a strange problem.

I put a little sound in my truck last Feb 08. No real problems. Today I was fine tuning the gain and high pass filter when all of a sudden my right front door speaker set (alpine spx-ref 6.5) went to static. The statis varies in intensity but is indepenent of volume control, fade, balance, etc. It is consistent whether the engine is on or off (with key still on). The only way to get rid of it is to turn off the hu. I pulled out the hu, checked the amp connections, speaker connections in the door and no dice. (note that i am not very tech/mech savvy). i did pull both sets of rca plugs from the mca2004 pushing front and rear door speakers and static still there. what the heck could be going on? and why would it just start out of the blue??

06 toyota tacoma double cab

alpine 9886 hu

memphis mcd500 500w

memphis mca2004 50w x 4

kicker 12 shallow sub

alpine x-ref 6.5 components (front doors)

kicker 6.5" (rear doors)

 
Sounds like a speaker wire is grounding out somewhere. I'd check all of the speaker wiring and then go from there. If all wire's and connections are good and the static still persists I would try hooking up the left speaker output to the right speaker(do this at the amp itself) and see if that changes anything.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

bodine76

Junior Member
Thread starter
bodine76
Joined
Location
New Orleans
Start date
Participants
Who Replied
Replies
1
Views
827
Last reply date
Last reply from
Millertime1028
561786595_18427607485102160_7010259965928918509_n.jpg

just call me KeV

    Oct 9, 2025
  • 0
  • 0
561583216_18427455586102160_8141545757991593433_n.jpg

just call me KeV

    Oct 9, 2025
  • 0
  • 0

New threads

Top