sqLLLLLLLLLL

Go with a 10" fi q in a .7 cube box with external ports firing into the rear.
Does the Fi Q come in a 10? I only see 12 and up on the website now.... a 10" Q would be awesome for my application.

sorry for the hijack.

 
Lawl, u must be slow too. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
And to the OP, if u have room to do a pair of shallow 12's, u should have enough room to do a small porter box for a 10. kthnxbye.
negative sweetie... its going as a center console in the back of my frontier or under my back seat... if i do under the seat i have to downfire and if i do that i have room for one due to the floor rising up in the middle and the cone would smash into it.

 
Does the Fi Q come in a 10? I only see 12 and up on the website now.... a 10" Q would be awesome for my application.
sorry for the hijack.
yes the q comes in 10"... u cant read well //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Q10

DUAL 1 | DUAL 2

Fs: 29.0 Hz | 26.2 Hz

Re: 0.70 Ohms/coil | 1.4 Ohms/coil

Qms: 4.80 | 5.10

Qes: .41 | .41

Qts: .38 | .38

Mms: 186g | 202g

Cms: 1.70mm/N | 1.70mm/N

Sd: 310cm^2 | 310cm^2

Vas: 22.3 l | 22.3 l

Spl: 82.9dB 1W/1m | 82.9dB 1W/1m

Bl: 10.4 N/A | 15.1 N/A

Xmax: 27mm

Rms: 1000W

Sealed box: .2-.6 cuft

Ported box: .5-1.2 cuft @ 28-33Hz

Sub OD: 11.000”

Cut ID: 9.250”

Mounting depth: 6.500”

Displacement: 0.12cuft

Product code: 01710

Price: $ 249.00

*shipping is included

Configure Speaker:

Ohm:

BP Power:

Quantity:

 
Image Dynamics IDQ10v3.D2 with Autotek SS 500.1

SSA Icon 10" Dual2ohm with Autotek SS1000.1

JBL W10GTi 10" with AutoTek SS1000.1 (Needs a lot of mounting depth though)

or the 10" Q D2 and the AutoTek SS1000.1

 
Image Dynamics IDQ10v3.D2 with Autotek SS 500.1
SSA Icon 10" Dual2ohm with Autotek SS1000.1

JBL W10GTi 10" with AutoTek SS1000.1 (Needs a lot of mounting depth though)

or the 10" Q D2 and the AutoTek SS1000.1
IMO the IDQ is a little weak for sqLLLL install. Sounds **** good just dont get too loud

 
yes the q comes in 10"... u cant read well //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gifQ10
Gracias. You are right, but in my defense when you click on speakers, the overview only lists the 12 and above. Once you click on the Q, then it shows the 10. My bad for not clicking one more time. Thanks //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
IMO the IDQ is a little weak for sqLLLL install. Sounds **** good just dont get too loud
x2 im leaning toward the Q because that thing can handle power and get loud... fits exactly what i want

mix of both... sq + spl = sound quality LOUD //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif i like my shit nice and crisp but i want it to hurt my ears when i turn the volume up..

 
ixl or icon or q, all nice sealed
//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif:)//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif:)//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

deLeo

10+ year member
CarAudio.com Elite
Thread starter
deLeo
Joined
Location
FL
Start date
Participants
Who Replied
Replies
29
Views
2,092
Last reply date
Last reply from
mlstrass
IMG_20260515_202650612_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0
IMG_20260515_202732887_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0

New threads

Top