SQ Amp

is that an SQ amp i dont know about that. maybe a sound stream rubico but i dont know if they have that load capability or power maybe some one knows but i think you can get better for sq.

 
I have to aggree with the Soundstream amp , After Having Arc Audio , Us amps , Orion , PPi , And others , I now have a Soundstream and have never had a cleaner better sounding amp in my set-up , Not even my Arc which was told to me by many as one of the best , The soundstream beats it Hands down ! Mine is a Lil wonder 4 bridged to 2 channel and still sounds better than anything I have had to date ! But try and find the original SS line and not the newer stuff I hear it isnt nearly as good

 
Originally posted by Jmac The 2001 Rubicons owned in SQ. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif I haven't had any experience with the new Rubis but I would expect that they'd be similar ... I haven't, however, heard that they're any worse than last year's ... Where/who did you hear that from ?
Just heard it , Not sure where , I was told to stay away form the "Rub 2" Line as they were made by Power acustik or something

 
Originally posted by musicman any other suggestions for SQ amps?

 

I'm lookin for a 4 channel that can easily do 75x4 and another amp that can easily do 600-700x1.

 

any other suggestions?
If you have money to burn .....

Arc Audio 4150 4x85 rms @ 4 ohm

Arc audio 1500 750x1 @4 I believe and 1000x1 @ 2 I could be off on this one but its close

 
Originally posted by musicman any other suggestions for SQ amps?

 

I'm lookin for a 4 channel that can easily do 75x4 and another amp that can easily do 600-700x1.

 

any other suggestions?
for the 4 channel check out the USX4085, http://www.usacoustics.com I have oend it before and it works well and sounded good. PLUS, save a lot of money over the arc, even though they are great.

NG

 
the perfect amp for this application is the Zapco Reference 1000 //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Subs play to the beat with gain low but if I turn it up my subs play loud unwanted never ending bass that is constant and wont stop until I turn...
0
35
You have a blown cap in the amp more than likely. Had the same thing happen to a soundstream amp.
1
55
Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
235
No need to bypass the amp. Most use an LOC that takes the full amped signal and turns it into a flat RCA level signal. Here is the newest I have...
2
439

About this thread

SasquatchBump

10+ year member
SQ is better
Thread starter
SasquatchBump
Joined
Location
Pendleton, Oregon
Start date
Participants
Who Replied
Replies
12
Views
849
Last reply date
Last reply from
Spddracer
received_1404248310277849.jpeg

Blackout67

    Jun 10, 2024
  • 0
  • 0
445981256_3731324230470906_9081536917273579948_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0

New threads

Top