SPL box

[XtrmAudioCncpts 10+ year member]

i looking at building an spl box for my 2 10" apline type r's. but i havent made a spl box before help me out

Click to read more...

 

[XtrmAudioCncpts 10+ year member]

some one?anyone

 

[ngsm13 5,000+ posts]

I'ds say 1-1.5 cubes NET per sub, Four 4" aeroports, tune to taste...

NG

 

[XtrmAudioCncpts 10+ year member]

on WinIDS with 3.5cubic with 4 4" ports tuned to 45hz puts port length at 16.26 with max spl @ 130.779 @ 52hz does that sound ok? //content.invisioncic.com/y282845/emoticons/blush.gif.99bc659ee2012b7d826165e26fb5eebe.gif

 

[ngsm13 5,000+ posts]

on WinIDS with 3.5cubic with 4 4" ports tuned to 45hz puts port length at 16.26 with max spl @ 130.779 @ 52hz does that sound ok? //content.invisioncic.com/y282845/emoticons/blush.gif.99bc659ee2012b7d826165e26fb5eebe.gif

How much power do you have?

nG

 

[Mr. Opportunist 10+ year member]

ignore winsid and tune lower imo

 

[XtrmAudioCncpts 10+ year member]

Orion 2500d at half ohm for burps

 

[kotec123 10+ year member]

hmmm id say those r's should be tuned lower

 

[toaster 10+ year member]

yep, tune to about 36 hz with 10s.

 

[XtrmAudioCncpts 10+ year member]

i dont know i havent made an spl box before so 36 would be good for comps?

 

[ngsm13 5,000+ posts]

I'd tune b/w 36-42hz...

Keep the NET volume at no more than 3cubes. If you have room, mount the aeroports on the outside of the box. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

NG

 

[XtrmAudioCncpts 10+ year member]

will do then ill have to find a meter and see how i do

 

[XtrmAudioCncpts 10+ year member]

any where i can get aeroports

 

[Moe Lester 10+ year member]

any where i can get aeroports

http://www.partsexpress.com precision ports

 

[XtrmAudioCncpts 10+ year member]

which way is better? both boxes are ~3cubics after displacement