Sold Some Stuff...

[Alpine CDA-9815 10+ year member]

I'm going to be changing my system set up... so this stuff may go. I'm not looking for trades. Everything works just fine. Also pics were taken at random times (all within the last 2 weeks) and I'm too lazy to take new pics with name/date.

12" Fi Q (dual 2 ohm) also as you might can see it has a scuff on the surround @ 7:30ish o-clock it does not effect the sub.

Q12

DUAL 1 | DUAL 2 Fs: 28.4 Hz | 27.1 HzRe: 0.7 Ohms/coil | 1.4 Ohms/coilQms: 05.39 | 5.63Qes: .49 | .48Qts: .45 | .44Mms: 211g | 231gCms: 0.15mm/N | 0.15mm/NSd: 481cm^2 | 481cm^2Vas: 48.3 l | 48.3 lSpl: 85.4dB 1W/1m | 84.8dB 1W/1mBl: 10.4 N/A | 15.1 N/AXmax: 27mmRms: 1000WSealed box: .8-1.5 cuftPorted box: 1.8-2.5 cuft @ 28-33HzSub OD: 12.500” Cut ID: 11.125” Mounting depth: 7.000” Displacement: 0.16cuft

$170 shipped

CDT EF-61CF's (still in car, used for a week so far)

6.5" 2-way

Midrange: 6.5" Cast

Crossover: SatNet-480 Elliptic

(CDT has added functionality and quality in this module with provision for an extra tweeter. Satnet 480 is an upgrade of Satnet 456 with an extra set of terminals for an image tweeter. This operates in parallel the main tweeter. Both are protected. The film capacitors are larger. Level control is by slide switch instead of jumper.)

4th order2-way

Tweeter: 1" Smooth Silk Dome

Power handling: 140 watt RMS

Frequency response: 55-20kHz

Sensitivity: 90.1 dB.

Impedance: 4 Ohm

Surface & flush mount tweeter

$180 shipped

12" Type R (dual 2 ohm)

RMS Power Range : 50-500 Watts

Peak Power Handling: 1500 Watts

Impedance: Dual 2 Ohm

12" component subwoofer

Kevlar-reinforced pulp cone

Cast aluminum frame with perimeter venting

Dual 2-ohm voice coils

Low Frequency response: 24 Hz

High Frequency Response: 500 Hz

Sensitivity: 87 dB

$90 shipped

Memphis 16 PRD1000.1 (comes with gain knob)

Class-D Monoblock Amplifier

RMS Power Ratings:

300 watts x 1 chan. @ 4 ohms

600 watts x 1 chan. @ 2 ohms

1000 watts x 1 chan. @ 1 ohm

Black Textured Finish Heatsink with Black Chrome Trim and Injection Molded End Plates

Fully Variable Low-Pass Crossover (50 - 350 Hz)

Power and Protection LEDs

Adjustable Gain Control

0 - 18 dB Bass Boost

Subsonic Filter: 20 - 50 Hz

Low Level Input

RCA Outputs: 1 Pair

Optional Remote Gain Control

PWM MOSFET Power Supply

Platinum Finish Terminals

Dimensions: 9.5" W x 2" H x 10.75" L

$150 shipped

Memphis 16 PR100.4

400 watts MAX, 4 Channel Car Amplifier

RMS Power Rating:

4 ohms: 50 watts x 4 chan.

2 ohms: 70 watts x 4 chan.

4 ohms Bridged: 100 watts x 2 chan.

MOSFET Power Supply

Heat Sink Equipped

High Level Inputs

RCA Level Input

18 dB per octave, Variable High Pass, Full Pass, and Low Pass Crossover

Tri-Mode Operation Capable

Overload, Short Circuit, Thermal, and Reverse Polarity Protections

Fan Cooling

Bass Boost: 0 - 9 dB @ 45 Hz

Dimensions: 14.25"L x 9.37"W x 2.6"H

$130 shipped

Click to read more...

 

[Alpine CDA-9815 10+ year member]

Bump.

 

[MmatsDude 10+ year member]

what would you give me for a new FI BL 15 Loaded for daily driving(BP, Flat Wind and Extreme Leads)

 

[Alpine CDA-9815 10+ year member]

what would you give me for a new FI BL 15 Loaded for daily driving(BP, Flat Wind and Extreme Leads)

As in trades? If so PM me, maybe we can work something out.

 

[greendragonslim 10+ year member]

would the alpine work at 1 ohm?

 

[Alpine CDA-9815 10+ year member]

would the alpine work at 1 ohm?

Yes, 1 or 4 ohms.

 

[Alpine CDA-9815 10+ year member]

Bump.

 

[Alpine CDA-9815 10+ year member]

Bump. TTT.

 

[Alpine CDA-9815 10+ year member]

1000.1 sold.

 

[Alpine CDA-9815 10+ year member]

Bumpy....

 

[Alpine CDA-9815 10+ year member]

fi q is still for sale //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Alpine CDA-9815 10+ year member]

ttt