small box, big subs.

[Ellsworthz 10+ year member]

wow, someone actually using joints, NICE!

 

[Kastlez_ 10+ year member]

thread has potential.

Nice.

 

[Mythos 10+ year member]

Well if you really must know, I'm planning on double up all the sides that are going to be mdf. And the glass I'm probably going to layer up to an inch thick. Bracing all sides into the center of the glass mold each way, up, down, across, you name it. I prefer using glass over mdf so it sits better in my trunk, takes up as little space as possible and maximizing volume efficiency. I can't picture the glass being a big deal as long as I keep it free of air pockets, that's the major problem with it. I usually sand out any imperfections after each layer. I'm sure 15 layers of glass will be near bullet proof...right?

A buddy of mine suggests I do it up in a sealed box which I'm hoping to avoid. But as you can see from the pics of my trunk I don't have a lot of room to work with, I've done a rough estimate and I could probably get around 6 cubic feet out of a box.

I'm still pretty new to the audio world so I pretty much went along with my buddy, I'm still contemplating a port. Anyone have any suggestions? I'm not looking at stripping the interior. I use this thing as my daily.

Yeah the joints weren't a big deal, I had to go out and buy a table saw though. It was on my list of things to do anyways so I figured why not.

Only ballers run Omega's and a XXX amp //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Tell me about it, so far it's cost me $4200. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[galacticmonkey 5,000+ posts]

Nobody gives a shit what you do for a living, or what you used to do as a kid.

Go play hockey, you Canuck. //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[luv2shrOOm 10+ year member]

Only ballers run Omega's and a XXX amp //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

only ballers upgrade from Rockford to Omegas....//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[1980supreme 10+ year member]

Nobody gives a shit what you do for a living, or what you used to do as a kid.
Go play hockey, you Canuck. //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

Nobody wants to hear your opinion.

I'm sure everyone's thinking it... You're a ***. hope you're enjoying the homosexual lifestyle you've chosen.

 

[galacticmonkey 5,000+ posts]

It was just my formal welcome to the ca.com community. Not to be taken personally.

 

[Mythos 10+ year member]

you getting rid of those old HX2's?

Already sold, guy came by the other day and took off my hands for $150 no questions asked.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

btw nice work but build that up to 1/2in to 3/8in thickness and love the wood work with the joints

The box is nowhere near completion, I went out and spent $150 on glass today, I'm going to prob end up building up the bottom to 1" thick. And the sides of the box will be mdfed 2 layers of 3/4" and braced every which way. The joints were kinda a ***** cause I had to go out and buy a table saw and a dado set.//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Mythos 10+ year member]

So it's been a few weeks since my last update, so I figured it's time to bump this thread, here are some pictures of some recent work I did and some more audio goodies that arrived in the last little bit.

Mmm, presents. I wonder what it is?

Can't go wrong with Zapco.

350X2 for those of you still wondering.

Another Odyssey battery and some 0 gauge terminals, also got some Knuconcept Konfusion terminals as well that are already on the car.

Here's all the stuff I gotta somehow make room for in the trunk. Don't laugh that little battery puts out 1500 cranking amps.

Some updated box pictures.

I've been trying to make appearances at the local shows so this project has been going kinda slow.

All that's left now are some kick *** components for the new amp. If anyone has any they're looking to get rid of PM me.

 

[Mythos 10+ year member]

My box also needs a port, anyone feel like helping?

 

[SethPhillips 5,000+ posts]

this is gunna be nice..

looks good man.

 

[mmouse57 10+ year member]

when ya fiberglass how can ya stop inbetween steps //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

when i do it i cant stop till its done //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

nice work so far m8

 

[luv2shrOOm 10+ year member]

i so tired, everytime i see the title i see "small box, big tits"...heh

 

[Mythos 10+ year member]

I don't know, I get headaches for days if I spend more than 5 hours on it.

I also have to do about 8 layers so I'm not too keen on doing them all at once, not to mention I still have a few more pieces to cut out of mdf, and still need to design a port //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

i so tired, everytime i see the title i see "small box, big tits"...heh

Don't worry, next time I post pics it will be something worth looking at. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[da box king 10+ year member]

run 2 sets of comps with that power