slave amp goes into protect...

[HawaiianBassHed 10+ year member]

have a pair of crossfire xp1400d's strapped on a pair of custom built 10"s, I like the numbers but want to see the amps stay on //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif maybe not just the slave I'll test more and see...

so far from my own conclusions, I'm going to check all connections and try different signal cables/RCAs and see if that helps... I was thinking maybe both amps were clicking off possibly, but the power/protect light on the master I can see from the drivers seat and it stays blue... so its not going into protect, so I assume the slave is... anyway, I'll also try running the phase 180 on the master to see if the subs are jumping the gap or something creating a 0ohm load or something funny... if I get them pounding backwards I don't think they can jump the gap. I'll just have to worry about them bottoming out instead //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif thanks for any input...

Tom

Click to read more...

 

[casper97ta 10+ year member]

Hey Tom. The first thing I would try is switching the amps around and see if its something wrong inside of the one you have as the slave now.

 

[HawaiianBassHed 10+ year member]

yeah, I was thinking about doing that too, they get pretty loud but, at top end is where the one or possibly even both shut off, I gotta look into it better I suppose... thanks for the comment //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[HawaiianBassHed 10+ year member]

lmao... didn't get to testing today, maybe tomorrow... I'm thinking phasing it 180* it'll be fine, I think the subs are just hitting their mechanical limit and it's not helping the amps //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif