Skip01: Operation DeGAY.....Civic coupe

I'm prolly gettin my black dash Sunday. Not painting anything.

I have most my center console shifter pieces comin in already.

I just bought black carpet yesterday also.

All I need left that I haven't bought yet is door panels and trunk carpet I believe

 
I'm prolly gettin my black dash Sunday. Not painting anything.
I have most my center console shifter pieces comin in already.

I just bought black carpet yesterday also.

All I need left that I haven't bought yet is door panels and trunk carpet I believe
what type interior color dark or light and where did you get your carpet at.

 
Yehhh, but everyone has H22s.....i gotta be a tad different.
Either im keeping it stock d16z6 or K-series.......maybeeeee B20 in there, but idk at the moment.

Thats farrrr down the line in things i want too do

If you're going all-motor, go with something DOHC or you will have a very narrow power band. Or, keep the stock d16 and just snatch some low-comp pistons, a new cam, and boost that thing to holy hell //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I've seen people run 400+ on d16's with a street tune and pump gas. Plus, the blow off valve makes the ladies get wet //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
6psi?
doesnt the size of the turbo have to do with the amount of power you gain from a certain psi with your turbo?
that it doesss //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

6spi on a GT40 vs a 14b is night and day

 
Obviously i don tknow my Honda lingo...

but i would get a Wtf69 and BBQ242 running on propane, should be enough to run at least 20,000 BTU, Throw on some Heinz 57 on there and some A1 and you have a motherfvckin party

should be good for mid 20s and a hella party

oh yea...thats just what i would do:fyi:

 
skip you need more than 150 wheel to get to 14's....grab some p29 pistons kit from ebay like 3-400 and rebuild the motor...then chip and tune the ecu and you have an all motor civic running on 93 octane that puts down 200 to the wheels...good for 13-14 depending on how well you drive. believe me i've done the build very simple and bolt ons dont add much...

 
skip you need more than 150 wheel to get to 14's....grab some p29 pistons kit from ebay like 3-400 and rebuild the motor...then chip and tune the ecu and you have an all motor civic running on 93 octane that puts down 200 to the wheels...good for 13-14 depending on how well you drive. believe me i've done the build very simple and bolt ons dont add much...
Well it all depends on the driver...heck you could have a 400hp car and horrible driver running 14s all day.

I know ILL only need 150-160hp to wheels to get 14s.

With my 4dr LS swapped civic only putting 116hp to the wheels dyno tested ran a 15.8, seen here:



That was a horrible 2.4 60ft also, my friend in his boneee stockkk 220k mile 94 GSR ran a 15.3 at same mph.

So i can only speak for me driving the car when i say i only need 150-160hp too the wheels to get 14s easily on street tires.

Maybe someone else couldnt, but i can //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Skip01

5,000+ posts
Diggy
Thread starter
Skip01
Joined
Location
Marrero,LA
Start date
Participants
Who Replied
Replies
273
Views
29,496
Last reply date
Last reply from
mbrooky
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top