single cab system help

[basssquared 10+ year member]

well i just purchased a new Chevy truck i fell inlove with it when i saw it and just bought it didn't get to thinking about it till later that theres no way in hell i was gonna be able to fit my 15 HDC3 and RD1750.1 in there so now im stuck n have no clue what to do i've considered a blowthrough but with just one 15 dont think itd be worth chopping my truck up any ideas?

Click to read more...

 

[Johnny Law.Lulz 5,000+ posts]

Bench seat or buckets ?

 

[hatedonmostly 5,000+ posts]

If it's a full size, you shouldn't have any problem getting the recommended airspace.

 

[basssquared 10+ year member]

bench seat and its a single cab not full or extended cab the window is right at the headrest not much room behind and no room underneath

 

[Johnny Law.Lulz 5,000+ posts]

If it's a full size, you shouldn't have any problem getting the recommended airspace.

Wrong. Look at what i had to do to fit a 12" in mine. I had more room that a Chevy too.

bench seat and its a single cab not full or extended cab the window is right at the headrest not much room behind and no room underneath

You can sacrifice leg room and switch to buckets or you'll need to downgrade, you should be able to fit 4 SA 8"s in there //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[hatedonmostly 5,000+ posts]

bench seat and its a single cab not full or extended cab the window is right at the headrest not much room behind and no room underneath

lol. A full size is a Ram, F-150, etc.; as opposed to a Dakota, Ranger, S-10. Not the size of the cab.

Depends on how much legroom you want to give up, but probably won't be able to do much with bench seats.

 

[hatedonmostly 5,000+ posts]

Wrong. Look at what i had to do to fit a 12" in mine. I had more room that a Chevy too.


You can sacrifice leg room and switch to buckets or you'll need to downgrade, you should be able to fit 4 SA 8"s in there //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

That bobby34 retard put an 18" in his Ram.

Four SA-8's is gonna need at least 3 cubes ported...

 

[Johnny Law.Lulz 5,000+ posts]

That bobby34 retard put an 18" in his Ram.
Four SA-8's is gonna need at least 3 cubes ported...

the SA's could do 2.5 most likely, or just run 2 of them. And a Ram has a hell of a lot more room and he had buckets. This 15" needs like 3.5 cubes. I had to do buckets and have my legs touching the dash to get 2.39 in my 89 F-150 and im 6'0". Shit sucked.

 

[basssquared 10+ year member]

That bobby34 retard put an 18" in his Ram.
Four SA-8's is gonna need at least 3 cubes ported...

might as well stick with my 15 i know it would perform ok in 3 cubes ported but i doubt i can come up with 3 cubes i thought about making a enclosure/seat so like remove my bench and make a new bench that is actually a box and just cushion it so its comfortable what do you guys think about that?

 

[basssquared 10+ year member]

That bobby34 retard put an 18" in his Ram.
Four SA-8's is gonna need at least 3 cubes ported...

might as well stick with my 15 i know it would perform ok in 3 cubes ported but i doubt i can come up with 3 cubes i thought about making a enclosure/seat so like remove my bench and make a new bench that is actually a box and just cushion it so its comfortable what do you guys think about that?

 

[Johnny Law.Lulz 5,000+ posts]

might as well stick with my 15 i know it would perform ok in 3 cubes ported but i doubt i can come up with 3 cubes i thought about making a enclosure/seat so like remove my bench and make a new bench that is actually a box and just cushion it so its comfortable what do you guys think about that?

I think it would look ghetto as hell but its not my truck.

 

[hatedonmostly 5,000+ posts]

the SA's could do 2.5 most likely, or just run 2 of them. And a Ram has a hell of a lot more room and he had buckets. This 15" needs like 3.5 cubes. I had to do buckets and have my legs touching the dash to get 2.39 in my 89 F-150 and im 6'0". Shit sucked.

Any new car is going to have more room than it's older counterpart, and OP has still not given us any info on the vehicle other than that it is a Chevy. //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

I'd put one of those 8's in 0.7 at the minimum. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

Shit, I am 6'8" and my knees are less than an inch from the dash all day long and my box is only 1.5 cubes. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif Can't wait to start this blowthough!

 

[hatedonmostly 5,000+ posts]

might as well stick with my 15 i know it would perform ok in 3 cubes ported but i doubt i can come up with 3 cubes i thought about making a enclosure/seat so like remove my bench and make a new bench that is actually a box and just cushion it so its comfortable what do you guys think about that?

Just buy another 15" and start cutting...

 

[basssquared 10+ year member]

I think it would look ghetto as hell but its not my truck.

cant really think of anything else to do i rather go with a blowthrough then loose my leg room **** that gotta ride in comfort

 

[Johnny Law.Lulz 5,000+ posts]

Do a blow through, sell your 15"s and get 2 12"s