Single 15" vs. 2 x 10"

  • 2
    Participant count
  • Participant list
I currently have two Phoenix Gold 10s in a sealed box. Sounds OK but I just eyeballed a Dayton (Parts Express) Dual Voice Coil 15-inch that is -3db in a 3.5 cu. ft. box. This driver looks very decent.

Would I get more bass impact and slam by changing out my 2 10's for the single 15 assuming both are in sealed boxes?

The Dayton Driver:

http://www.partsexpress.com/pe/showdetl.cfm?&User_ID=12355548&St=1724&St2=-42148015&St3=-42583078&DS_ID=3&Product_ID=7765&DID=7

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

2x 4 ohm coils can be wired parallel to 2 ohms or series to 8 ohms. There's many amps with 2 ohm power you can use.
3
684
Avoid jvc 480bhs hard to see the display in the daytime even with the brightness all the way up also not as easy getting to the audio menu like...
5
1K
  • Locked
Oh, just for future reference. Put $800 OBO, or you will only get that $600, or less. ;)
4
1K

About this thread

Horizons

Junior Member
Thread starter
Horizons
Joined
Location
Orange County, CA
Start date
Participants
Who Replied
Replies
1
Views
430
Last reply date
Last reply from
Bavarian3
Screenshot_20240611-211145.png

Blackout67

    Jun 11, 2024
  • 0
  • 0
received_1404248310277849.jpeg

Blackout67

    Jun 10, 2024
  • 0
  • 0

New threads

Top