I am looking for a 10" sub.
All I am looking for is SQ. I want it to be smooth.
The sub will go in a .6-.7 cubicft sealed box.
Here are the specs on my AMP:
- Power Output at 2 Ohms, at 12V: 60 Watts x 4 (1kHz, 0.5% THD) + 200 Watts x 1 (100Hz, 0.5%THD)
- Power Output at 2 Ohms, at 14.4V: 80 Watts x 4 (1kHz, 0.5%THD) + 300 Watts x 1 (100Hz, 0.5%THD)
- Power Output at 4 Ohms, at 12V: 40 Watts x 4 (20Hz - 20kHz, 0.05%THD) + 150 Watts x 1 (100Hz, 0.5%THD)
- Power Output at 4 Ohms, at 14.4V: 60 Watts x 4 (20Hz - 20kHz, 0.05ò0THD) + 200 Watts x 1 (100Hz, 0.5%THD)
http://www.kenwoodusa.com/product/product.jsp?productTypeId=11&sortBy=price&productId=2426
I think I am going to run the amp 5 channel.
What is a good sub under 200 bucks that will perform much better than the crappy kenwood db+ I have now. The sub I use now is single VC 4 ohm. I have been looking a DVC subs but have no idea how to wire them or what type to get (4ohm 2ohm 6ohm?)
Thanks in advance
All I am looking for is SQ. I want it to be smooth.
The sub will go in a .6-.7 cubicft sealed box.
Here are the specs on my AMP:
- Power Output at 2 Ohms, at 12V: 60 Watts x 4 (1kHz, 0.5% THD) + 200 Watts x 1 (100Hz, 0.5%THD)
- Power Output at 2 Ohms, at 14.4V: 80 Watts x 4 (1kHz, 0.5%THD) + 300 Watts x 1 (100Hz, 0.5%THD)
- Power Output at 4 Ohms, at 12V: 40 Watts x 4 (20Hz - 20kHz, 0.05%THD) + 150 Watts x 1 (100Hz, 0.5%THD)
- Power Output at 4 Ohms, at 14.4V: 60 Watts x 4 (20Hz - 20kHz, 0.05ò0THD) + 200 Watts x 1 (100Hz, 0.5%THD)
http://www.kenwoodusa.com/product/product.jsp?productTypeId=11&sortBy=price&productId=2426
I think I am going to run the amp 5 channel.
What is a good sub under 200 bucks that will perform much better than the crappy kenwood db+ I have now. The sub I use now is single VC 4 ohm. I have been looking a DVC subs but have no idea how to wire them or what type to get (4ohm 2ohm 6ohm?)
Thanks in advance