Show me an inner dustcap

[zachzchw 5,000+ posts]

no but nauc he ment when yours was bottoming out.
does that sound like yours did when they were popping?

In the videos, it sounds bad the whole time.

In reality, it only does it when Im pushing it hard. Just wanted to clarify that the video sound isnt accurate.

 

[nauc 10+ year member]

no but nauc he ment when yours was bottoming out.
does that sound like yours did when they were popping?

hard to say, his vid is not very good

but id have to say no

his sounded like somethin was loose or rattling or even scrapping

mine was more a popping sound

 

[zachzchw 5,000+ posts]

indeed....
OR something wrong INSIDE the motor(i cannot see this however as ther eis no scraping sound) ..... then you taking the dustcap off wont matter :/

True.....

Its not like its a huge problem.....I just cant push them as hard as Id like.

I guess tomorrow I will take the dustcap off........if I do so, and post pics, can you guys point me in the direction of what all I need to check?

Not great with technical terms for sub parts.

 

[nauc 10+ year member]

In the videos, it sounds bad the whole time.In reality, it only does it when Im pushing it hard. Just wanted to clarify that the video sound isnt accurate.

yeah

again, do they both make that sound when played one at a time

if so, id say youre just pushing them too far

if not

one must be messed up

 

[MrSector9 10+ year member]

buzzy buzzy get out your hobby knife //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Actually to get mine off i used a little kinda dull jacknife.

A razor knife/xacto woudl be REALLY easy toslice the surround.

Even a butter knife would work, once you get the outside started it will pull off in one motion pretty much.

Well when you ge tthe dustcap off, in the center there will be a plastic circle with an X molded into it, that is the former cap (inner dustcap) check that around for a section that is loose, if you find a loose area take some goop or CA glue and glue it back tight.. put the sub in the box and try it after it dries.

If then ther eis no horrible noise, glue your dustcap back on

 

[bamaboy 5,000+ posts]

im telling you, this is what my MT did when it was misaligned, only way to fix it is recone, i hated it too //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

im not saying its misaligned, just your description sounds like what mine did, it was fine at low volume, but anywhere up a little it crapped out on me

 

[MrSector9 10+ year member]

hmm yeah did it do this since you got them?

or problem started after a while?

 

[nauc 10+ year member]

hmm yeah did it do this since you got them?
or problem started after a while?

what subs in your sig

 

[MrSector9 10+ year member]

blueprint 1203 //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[zachzchw 5,000+ posts]

hmm yeah did it do this since you got them?
or problem started after a while?

I bought them used.......

 

[MrSector9 10+ year member]

well start off simple and pop off the dustcap, if that don't work....

wanna trade it for an RE SE 12"

 

[Black_Jesus 10+ year member]

is this what u mean?

*view is looking into the *** end of one of my re se 12's*

http://img522.imageshack.us/my.php?image=49gq.jpg

 

[MrSector9 10+ year member]

that would be it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Phrozt 10+ year member]

sector.. i can't read anything in your pic sig...

 

[MrSector9 10+ year member]

IT states:

Nakamichi CD400

Mpyre652CS

Tangband W8-740C

Cadence Z400

BPD1203

Cadence Z9000

Vic 20 Carputer

Black/Orange Test CRT

Ghey Artistic Sig Pic

I need to make a new one though since I bought a bunch of new stuff, cancelled my mpyre preorder since it is 2 months later with no product still, and wlel my carputer is now upgrade to win3.1