Sold Selling a few custom subs. Memphis, TC Sounds, American Bass

[woofercooker 10+ year member]

I have a few motors laying around here that I would like to build up and ship out to make some room. I have parts to make 10", 12" or 15" woofers with choice of dual .7ohm (check with me since these coils do not fit the VFL motor), dual 1ohm, dual 1.4ohm and dual 2ohm coil.

First up is a TC-9 motor with 1" slugs SOLD

$160 Shipped SOLD

Next is a black TC-9 motor with .75" slugs

$150 Shipped

Next is an American Bass VFL motor SOLD

$160 Shipped SOLD

I also have a Memphis MOJO 15" woofer

$200 Shipped

Lastly I have the steel parts to build 2 3HP motors (only includes steel, no ferrite)

This will include 2 T-yokes, 2 large top plates and 2 small top plates

$125 Shipped for all of it(Steel alone weighs 60lbs)

Shipping and Paypal is included in all of this.

Click to read more...

 

[bsean63 10+ year member]

ohms on mojo??

 

[bsean63 10+ year member]

specs also please

 

[JUHL 10+ year member]

how bad is the hole in the mojo?

 

[rdaudioman1256 10+ year member]

What's the cheapest 15" you can make?

 

[woofercooker 10+ year member]

MOJO coils read 1.8 each. There are a few scrapes in the surround though none of them go all the way through. power handling is 1500/3000 iirc.

 

[woofercooker 10+ year member]

What's the cheapest 15" you can make?

Cheapest 15 I can do is that smaller TC-9 for 150. if you are looking to save anymore money I can use an older 4 spoke basket. It will function as notmal but cosmetically it looks like garbage...

 

[stuckinok 5,000+ posts]

Very good prices!!

Free bump

 

[woofercooker 10+ year member]

up

 

[hunterw 10+ year member]

g motor fs?

 

[NewAgeKing 5,000+ posts]

PM'ed

 

[woofercooker 10+ year member]

g motor fs?

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I have one that is in 3 pieces if you are interested in trying to reallign it

 

[grimreper912003 5,000+ posts]

Here are some of the parts I will be using //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Is it just me or is the gap fcked up on the motor in the corner?

 

[Cdieselfan 10+ year member]

Here are some of the parts I will be using //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Is it just me or is the gap fcked up on the motor in the corner?

I think thats the steel parts for the 3hp motor. No magnet slugs. Would you trade a ED flat cone 12a with the TC9 motor. Works but the baskets craked for the Steel?

 

[ampjunkielikeme 10+ year member]

can you get a dual 1 ohm coil for the american bass vfl motor?.....and how much power would it be able to take? if you cant i may get the tc9 motor instead....