ok, ive not read too much on ported boxes ... i dont know all the terminalogy or anything. so its hard to read about it when i dont know what they are talking about.. so here is my question.
i got my RE SE 10" DVC 4ohm woofer.
atm= sealed @ .5 cuft.
if i were to make this ported, can anyone give me some dimensions- 1.2cuft? ~38hz (manufacture recommended - any oppinions?)
mdf thickness=
length=
width=
height=
volume=
inner length=
outer length
innter height=
port height=
port depth=
port width=
port volume=
tuning freq=
here are the specs
RE SE 10 Inch Driver Specs
Triple Stacked Motor Structure
Dual 4ohm, 3" voice coils
Re : 5.7 (both coils wired in series)
Fs : 32 Hz
Qms : 5.91
Qes : .56
Qts : .51
Vas : 22.4 liters
Sd : 310 cm^2
Xmax : 16mm
600 Watts RMS 1000 Watts Peak
Sealed: .5 cuft for SQL applications.
Ported: 1.2 cuft on up(tuned to 38 Hz for daily apps)
im still kinda a newb at the boxes, but im getting there. i can build anything (almost) but i dont quite know how to do it all =)
and thanks alot for your time. i just want it to be loud in the ported .. like 50\50 or 60\40 SQ\SPL
//content.invisioncic.com/y282845/emoticons/toast.gif.bc0657bf54b9ee653b6438524461341e.gif
