saz4500

[BassFreq 10+ year member]

I ordered a saz4500d and was wondering how to fuse it. Will it pop a 300a fuse? Will I have to make 2 positive runs from the front battery each with a 300a in it? Ive never ran an amp this powerful so I have no idea what to do. Thanks.

Click to read more...

 

[plugitin 5,000+ posts]

well, the saz3500 uses a 350 amp fuse, so im assuming it can draw 450 amps of current from your electrical system. I REALLY hope you have a HO alty, and some big batts...or else you will hurt this amp man...

 

[dbeez 5,000+ posts]

The 4500D will have dual inputs for power and ground so 2 300amp fuses one on each run of 1/0 will do fine...

 

[ssackett 10+ year member]

Hmm can i have it when you blow it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

HAHA! JK man! Just run a 300a fuse per POS run and you will be good to go!

 

[BassFreq 10+ year member]

Thanks guys, I didnt know it had a dual positive input. I do have a 250 amp mechman at and 3 hc2400s for it. I am hoping that will be enough.

 

[BassAddictJ 5,000+ posts]

Thanks guys, I didnt know it had a dual positive input. I do have a 250 amp mechman at and 3 hc2400s for it. I am hoping that will be enough.

should be enough. i mean more wouldnt hurt but that at minimum should be enough

 

[sundownz Pro Seller]

Sounds like a good electrical for it.

 

[Sanchito 10+ year member]

without enough power for a big amp you could blow it?

 

[sundownz Pro Seller]

Yes, voltage will drop too low and destroy the amp.

 

[Supergumby5000 5,000+ posts]

well, the saz3500 uses a 350 amp fuse, so im assuming it can draw 450 amps of current from your electrical system. I REALLY hope you have a HO alty, and some big batts...or else you will hurt this amp man...

the 3500 is rated for a 300amp fuse, unless the website lies to me....

 

[sundownz Pro Seller]

It's pretty difficult to find a fuse larger than 300 -- that still works on the 3500D.