SAZ or A7 OKUR

[LosIsATool 5,000+ posts]

And i only have 10 foot run

 

---------- Post added at 05:49 PM ---------- Previous post was at 05:48 PM ----------

 

***** pics uploading now. Crap phone pic but u get the idea. 17.5lbs very solid feeling amp.

Thanks.

 

[dumple 5,000+ posts]

So its bigger means its better?

 

[LosIsATool 5,000+ posts]

So its bigger means its better?

it means it doesnt hurt and its not maxed out yet. 3.5K from a good amp can be ran on 1 run of good cable. If it was being pushed to hard then the rear bank would take a hit. It dont. I know my car. This is the 5th set up I have had in a year in it. I know what it can and can not do. To go from a 143.9 on a crescendo BC2K at .5 rated 2800 at 13.8 after running hard for a 3 hour drive to get to the show to hitting a 143.3 with the kicker rated 2787 at 14.4 and not running it hard for 3 hours. Im pretty sure both of the options Im asking about will put me over 144

While mantaing great SQ

 

[disturbed471985 5,000+ posts]

0awg terminals, 200amp external fuse needed.

 

[LosIsATool 5,000+ posts]

I think I like the horizontal fets on the SAZ more. The Okur looks just like the DC 2K and AQ2200

 

[disturbed471985 5,000+ posts]

I got mine BNIB for alot less then a saz-1500 and it does alil more power. Im happy but get what u like man thats what I did.

 

[LosIsATool 5,000+ posts]

I got mine BNIB for alot less then a saz-1500 and it does alil more power. Im happy but get what u like man thats what I did.

Thats the main thing. I just hate my Kicker. Its a eyesore. And I already have the distro blocks, fuses and cable laying around. The 2K like yours would be my choice if I was going to go 4K, but then I would need 1 more run and a front ground

 

[disturbed471985 5,000+ posts]

they are fused for 200amps so yea 2 runs would be needed if you plan on stapping a set. I plan on running mine on 3 10's wired at.67ohm.