S10 reg cab box help!

[Skadoodat]

Alright, so I'm planning a build for my S10 reg cab, and need help designing the box.

It's going to be 2 SA-10's in a 2 cu. ft box net, ported, tuned to 33-35 Hz. Also powered by a SAZ-1500.

My max dimensions are 50"L, 22"H, 9"D bottom, 5"D top.

I made up a box using the torres box calculator, but I was having problems with the port.

I'm planning on using aeroports, but they were needing to be too long for that tuning in a small box.

Not sure what diameter, and how many I would need.

If anyone can help me out I'd appreciate it!

Click to read more...

 

[mast240 10+ year member]

ever think of a slot port instead?

 

[Skadoodat]

Someone else also mentioned just using a slot port, so I guess I'll just use that. I'm just having trouble designing the box and port.

 

[RAM_Designs 5,000+ posts]

Is that 50" width tight between your interior panels, or does it allow some room for the side-firing port that you planned on using?

 

[Bggd_GMC 10+ year member]

i hate single cab -_-

 

[Skadoodat]

Yeah, 50" from one to the other. But I can gain 3-4" from taking off each side panel.

 

[Skadoodat]

i hate single cab -_-

Same here, haha.

 

[Flastrongman 10+ year member]

I would go 2.4 with 2 4" aeros. side fire the ports to the passenger side. Don't go the full 50" wide if possible. Not sure if all that will fit properly but you can hit me up for a design if you need help.

 

[mast240 10+ year member]

you act like the military will just lock up anyone and everyone... there are guys at gitmo that need to be there, and there are numerous individuals who have been released... not saying that your freedoms aren't being stepped on, cuz thats been happening for a LONG time... but its not like the gustapo is rolling into town, and you can get rid of that neighbor you dont like just by claiming he's a jew... just a little perspective

 

[Skadoodat]

I would go 2.4 with 2 4" aeros. side fire the ports to the passenger side. Don't go the full 50" wide if possible. Not sure if all that will fit properly but you can hit me up for a design if you need help.

Well I emailed sundown audio, and they told me 2cu.ft was perfect. Or should I go a little bigger? And is firing the ports to the passenger side better than drivers? I've just read drivers side is better. And I just put 50" as my max cause I wasn't sure where id fire the ports. But I know there's gotta be at least 4" from the wall.