round port to slotted

[shortyg83 10+ year member]

FYI some people will disagree with your port dimensions due to it being so tall and skinny.
That's why I stick with sealed boxes. Get the right volume and you're golden.

What size is the sub. For a 10 or 8 inch sub a 1 or 1.5 inch wide port isn't to bad.

 

[Techchild 10+ year member]

What size is the sub. For a 10 or 8 inch sub a 1 or 1.5 inch wide port isn't to bad.

I designed it for a 10" by his reqest //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[01 S 10 10+ year member]

typical MAX port ratio is 1:8, but with only a single 10" and low power it should sound good.

 

[Granpaa 10+ year member]

Thank you Techchild for the plans about to start cutting out the pieces.

 

[ultimate157 5,000+ posts]

and that's why I don't design boxes //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Granpaa 10+ year member]

??

 

[ultimate157 5,000+ posts]

??

I was wrong about the dimensions //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Granpaa 10+ year member]

you offered help...I appreiciate that....I know every little about this stuff just trying to help my Grandson.

 

[Granpaa 10+ year member]

thanks to all....I will post pics if I can figure out how

 

[Techchild 10+ year member]

Is it all done?

To post up pictures put them on your computer then upload them to either photobucket.com or imageshack.us then take the direct link and put it between image codes that look like this

[.img][./img] but without the . //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif