ferguson621
Senior VIP Member
its been awhile since I've posted, new car, new build, beefier electrical, now I need some assistance with a box....
Car- 2005 scion tC
Amp- taramps md8k @2 ohms
Taramps pro 2.6s processor
Subs- two DD 9500I 15's
Electrical- 250 amp ho alternator
Three runs of 2/0 from alt to battery
Three runs of 2/0 from front to back Batts
Two runs of 2/0 pos and neg from amp to Batts
4/0 from batts to distro blocks for pos and neg to the amp
Batteries- red top up front, red top in back, and a batcap 4000
I absolutely hate optimas, but batteries are so damn expensive lol, and I havent came across any good steals recently....
And for the enclosure, I took out the back seats, so I've got plenty of space to work with, my thing is is when I look at all the open space my mind races with to many crazy ideas and I can never seem to get anywhere lol.
I've tried searching for hatch builds to get ideas but I can't seem to find **** for some odd reason...but I will go take some pictures here in just a second so you guys have a visual.....i was thinking 10 cubes net, my goal is 155, before my other 8k fried i was able to hear just one of them on roughly 2k for a few minutes and my chest was pounding. I cant imagine what two will be like....especially on the right electrical.
I prefer it to be below the window also, ill go get some measurements also
Ok so my measurements are 35 wide, 45 deep, and 17 tall gives me 10.12 after port displacement...so I should be good, the port is 6 inches tall, 20 inches wide, and 20 inches deep for a tuning of 32hz, is that to low? Recommended port area is 166 for both, and that port puts it at 120.
Car- 2005 scion tC
Amp- taramps md8k @2 ohms
Taramps pro 2.6s processor
Subs- two DD 9500I 15's
Electrical- 250 amp ho alternator
Three runs of 2/0 from alt to battery
Three runs of 2/0 from front to back Batts
Two runs of 2/0 pos and neg from amp to Batts
4/0 from batts to distro blocks for pos and neg to the amp
Batteries- red top up front, red top in back, and a batcap 4000
I absolutely hate optimas, but batteries are so damn expensive lol, and I havent came across any good steals recently....
And for the enclosure, I took out the back seats, so I've got plenty of space to work with, my thing is is when I look at all the open space my mind races with to many crazy ideas and I can never seem to get anywhere lol.
I've tried searching for hatch builds to get ideas but I can't seem to find **** for some odd reason...but I will go take some pictures here in just a second so you guys have a visual.....i was thinking 10 cubes net, my goal is 155, before my other 8k fried i was able to hear just one of them on roughly 2k for a few minutes and my chest was pounding. I cant imagine what two will be like....especially on the right electrical.
I prefer it to be below the window also, ill go get some measurements also
Ok so my measurements are 35 wide, 45 deep, and 17 tall gives me 10.12 after port displacement...so I should be good, the port is 6 inches tall, 20 inches wide, and 20 inches deep for a tuning of 32hz, is that to low? Recommended port area is 166 for both, and that port puts it at 120.
Last edited: