rockford t5002 question

[RKPsk8er 10+ year member]

T5002, two channel...im gonna to use one to run two pairs of RSD's. each channel will read a 2ohm load. my question is should I use one channel for left side of car and the other for right, OR should I divide it into one channel for the front, one for the back?

Click to read more...

 

[Jeremy M 10+ year member]

i believe u want to do a left side and a right side.

 

[RKPsk8er 10+ year member]

thanks..anymore opinions?

 

[gunz4me 10+ year member]

thanks..anymore opinions?

If you use one channel for the front and one channel for the rear, you will NOT have any stereo separation and it will sound bad when your system tries to reproduce a stereo signal because right and left will be front and rear in your car. In your situation, I would do two speakers on the left channel and two speakers on the right channel, unless you don't care about stereo reproduction.

 

[RKPsk8er 10+ year member]

i understand stereo reproduction. I just dont know if it would sound better seperated from left to right or front to back. I guess i can easily test it out and see what i like best.