RL-p's got metered!!!

[req 5,000+ posts]

id say my subs were 300hp at the wheel //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

lol.

good score. too bad you didnt have a TL.

 

[Acidburn 5,000+ posts]

I didn't know you like Audiobahn Acid...

**** you, you know what i meant

the max amperage rating for 4ga is 135 amps, sooooo if you're pulling close to 150, you probably want to go to 1/0

 

[Shinobi 10+ year member]

Go with either a 1/0 or 2 gauge and get one of these http://www.cardomain.com/item/STISCB150

and you should be set if you plan on upgrading bigger in the future get 1/0.

 

[theCybe 5,000+ posts]

I'd imagine the guy was bullshit-testing you ; I've never heard of any HP rating for subs.

 

[jellyfish420 10+ year member]

I'd imagine the guy was bullshit-testing you ; I've never heard of any HP rating for subs.

4HP 18" for sale....http://forums.caraudio.com/vb/showthread.php?t=88690

anyway, i got a new vid up doing tocata in b.

i heard this song on the realm and had to do it. there is

a SX on there doing this song...i know that camcorder mics suc but

the rlp just sounds so much faster well.......check it out..http://www.realmofexcursion.com/videos/SoundSplinter/rlp15.4.wmv

 

[BoominBeast]

Yeah, what type of mic? Interested to here which one they used //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gifProlly a newer AC of something...

nG

same question. No way do you hit that on TL. So aah

NO 18 XXX

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

I could fart into the AC and get a score that high //content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

ALum10's BRO...

 

[eric77 10+ year member]

TC sounds made a couple of motrs that end in HP. The only ones I'm aware of are the tc3hp and the tc4hp.I think theres one or two more that Im not aware of. SO, the correct answer for that guy would have been neither. It is a tc9+. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Great score. Now go find a new tl and make everyone happy. lol.

 

[jellyfish420 10+ year member]

Great score. Now go find a new tl and make everyone happy. lol.

for real...you can never please anyone one here.

 

[ANeonRider 10+ year member]

replace your fuse with a bullet. ka pow! i read it somewhere..

Myth... busted.

 

[denim 5,000+ posts]

nice score

 

[bigbassman Premium Member]

TC sounds uses a horsepower designation on some of their motors, to estimate the power handling potential of what its going to be used for..

746 watts = 1 horsepower

oh, and the kriss meter, if it is within .1 of the old termlab, is around 7 db down from the new TL.. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Loyd L.

 

[alum10 10+ year member]

148 on dash - 7 = 141 on new TL.

so in no way were u close to 146 = so NO XXX18... U said u wanted more spl in your setup, well thats your prove, comin from yourself.

XXX18- 146.8 with not to much trouble

Thanks little bro aka BoominBeast.

 

[jellyfish420 10+ year member]

148 on dash - 7 = 141 on new TL.
so in no way were u close to 146 = so NO XXX18... U said u wanted more spl in your setup, well thats your prove, comin from yourself.

XXX18- 146.8 with not to much trouble

Thanks little bro aka BoominBeast.

i'm gonna have to build me a new box... //content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

ps...you never said what mic i had to do the 146 on

 

[Moe Lester 10+ year member]

those subs use the TC9 motor lol

 

[audioholic 5,000+ posts]

On a side note, never use a circuit breaker under your hood, glass fuses are much safer. A CB works by mechanical means, and as such, corrosion can/will affect it. And under a hood is a pretty harsh environment. At best corrosion will change the CB's break point (corrosion will make it harder to open the contacts) and at worst it would freeze totally, leaving your wire completely unprotected. A fuse, even if corroded completely in place, will still burn at the same current draw point. I only use CB's inside the passenger compartment, and fuses under the hood.