RF vs. Kicker

kickers by far...

take it up a little notch and get CVX's instead //content.invisioncic.com/y282845/emoticons/2thumbs.gif.fdc3ba010dbb42b61704534b46d02fe4.gif

 
not a good comparison.......p2's are lower class of sub.CVR=400w...........P2=250w
true. you can compare with p3s, and i love mine. in a sealed box, in the back of a convertible firebird with only 1.5 ft. each sub i hit 138's on the meter steady...

 
I've owned both, and the CVRs do hit harder. But I did like the quality of the P2s. Do it just like BeAllStar said, just bump it up a notch and get CVXs. I have one right now, tuned to 33hz, and that thing knocks harder then both CVRs easily.

 
P3s are okay. CVXs pwn them though. Out of P2s and CVRs, I'd go CVRs. Though, I'd keep my L7s and Solo Xs. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Both ****! I used a type r for a bit and tried a p3 cuz I used 2 p2's in the past and wanted to try it. The p3 ****** balls too. I gave it 600wrms and it was weak. I than bumped up to the best sub in the world, the treo te 12 //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif , and have used this sub for a year 1/2

 
kickers by far...
take it up a little notch and get CVX's instead //content.invisioncic.com/y282845/emoticons/2thumbs.gif.fdc3ba010dbb42b61704534b46d02fe4.gif
x2. I've seen the RFs and the cones can have a lot of flex. I've never seen a CVR or CVX or really any Kicker for that matter flex.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yep, that will mark the third iteration of teh X series. i figured that was in the loop as they have been running out of stock on the last...
11
811
Is this a blue or blue/white wire from the Kenwood? The ACC wire is red and although that should turn on the amp, it is not the prefered wiring...
1
795
low level when using RCAs so that knob should be pushed out. The crossover turn it all the way right and use the one on the head unit and set it...
5
1K

About this thread

Ruthless1992

10+ year member
Junior Member
Thread starter
Ruthless1992
Joined
Location
Wf
Start date
Participants
Who Replied
Replies
15
Views
6,043
Last reply date
Last reply from
lantz
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top