RECOMMENDATIONS for 2 10's in a M3

[954pilot 10+ year member]

ok what would you guys recommend for 2 10's in a 95 M3... sealed box about .65 cu ft per sub.... im not looking for a ton of bass but enough, and very clean (like everyone says). i havent purchasd a amp yet either so throw in some amp idea's also...

thanks!

Click to read more...

 

[jimmyslide 10+ year member]

price range? Has to be 2 10's? Any preferences? More info. and we can better help ya'

 

[954pilot 10+ year member]

yah it has to be 2 10's... already have the box. and for price wise i dont want to spend a arm and a leg.. more budget the better, but i dont want crap... and im not going for show quality or anything just clean bass... for a reasonable price //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

like $250 per sub is too much.

 

[Shinobi 10+ year member]

2 Lethal Injection 10's on a 1200 D

 

[jimmyslide 10+ year member]

That's what I was going to say...**** YOU SHINOBI!!!

Anything by RE or IA will be excellent. Even their lower end subs. Really good boom for the price and leaves you lots of money left over to get an amp.

For best bang for the buck - 2 RE 10's powered by a 300-400 watt amp.

If you want a little more boom - 2 LI 10's powered by a 800-1000 watt amp. (plenty of noise)

 

[saosin 10+ year member]

if 170 per sub isn't 2 much, i would go with the RE SE 10' a really good sq sub

 

[audioholic 5,000+ posts]

Koda 10's are killer SQ subs. They are right at the top of your price range however.

 

[954pilot 10+ year member]

thanks guys... can you guys post up the prices of the subs and amps too.... $170 a sub isnt bad if its a nice sub id go with that...

and i have heard a lot about the RE's so that will definitely be a possibility.

if i did 2 RE SE 10's.. what amp would you guys reccomend??? and how many channels???

i havent heard ofthe lethal injection subs before... good quality?? sound???

and for the fronts i plan on running some 5.25 MBQ components and i need to power those too.... so another amp recommendation would be great.

and for rear channel ill probably leave it with the stock 4" speakers as fill, or pull them out to get the bass in the cabin.

thanks again guys //content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif

 

[eric77 10+ year member]

I really enjoy my setup (2 diamond m6mkII 10's + eD NINe.1) as far as sq. It gets pretty dam loud for a couple of tens too. I have them installed in a jeep grand cherokee and they make the roof fluctuate about an inch when I crank them up. Diamonds are very well known for their awesome sq and many say that the M6's have just as good of sq as the tdx's (diamonds top of the line). I have them running in a .8 cuft box but they would work perfect in a .65 cu ft box, but thy need quite a bit of power. I have them running off about 750w each.

BTW, I got each sub for 175 through an authorized dealer and I picked up my NINe.1 amp for 250 direct through eD (http://www.edesignaudio.com). However, they raised the price on the amp and it is now 350, but is still well worth it.

 

[DFW40 10+ year member]

I like two RE SE 10's and the ED nine.1 would be a perfect match IMO.

1 Amp $350

2 Subs $350

 

[3.5Max6spd 10+ year member]

Sq subs to consider- Arc Kar 10's, Arc V2 10's, IDQ's, OZ Vectors, Diamond Audio CM3's, Alumapro Alchemy MX's, Rainbow Soundline 10's, Diamond M6's, Eclipse Aluminums

 

[brad481]

I recently purchased 2 Infinity Kappa Perfect 10.1's to go into a dual 10" box with .65 cu ft for each sub. They will be powered by an Infinity 610A, producing ~330w to each sub.

Infinity Class D 610A Amp - $214 shipped ebay

(2) Infinity Kappa Perfect 10.1 4ohm - $250 ebay

All brand new.

I should have them all installed by the end of the week!

 

[954pilot 10+ year member]

i just found out that the enclosure is only 5.6" deep... can anyone show me where i can find the info on the exact sizes of the subs????

so now i need a sub that is shorter then 5.6"

unless i mount them inverted or whatever and they are hanging out of the enclosure... pros and cons of this???

heres a link to the enclosure :

http://www.bavariansoundwerks.com/products/description.php/II=344/PA=0

 

[audiolife 5,000+ posts]

id 10 v.3 is 5.5" deep idq 10 is 4.5" deep. MB Quart RWE254 10" DVC Subwoofer which looks like thats in the pic of the enclosure 5.1" deep.

 

[954pilot 10+ year member]

whats the down side to mounting them with the basket out????