Recommend to me 400w @ 1ohm

[bibby 5,000+ posts]

I need an amp that does 400w @ 1ohm or 200x2 @ 2ohm per channel. Not looking to buy right this second unless you have something uber cheap. I just need some recommendations. Also I need a good quality amp, no cheap junk.

200x2 @ 2ohm

400x1 @ 1ohm

Thanks! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Click to read more...

 

[Kold_Killa 10+ year member]

http://www.cadencestore.com/ProductCart/pc/viewPrd.asp?idcategory=125&idproduct=382

300x2 at 2ohm...

Good quality for the price for sure.. not sure if you want uber quality or just decent cheap... probably buy that now.

 

[kmanian 5,000+ posts]

old school Orion Hcca or PPi Pro Mos

 

[MisterGrubbs 5,000+ posts]

I've heard some of the worst crap you'll ever hear about the new Cadence tx lineup. Daytonas are good, I've seen a couple and then proceeded to read up.

I would assume that you'll be running a sub with this amp, correct? What sub and what type of enclosure. SQ or SQL oriented system.

 

[bibby 5,000+ posts]

Looking at SQL with two eD 12's glassed in a false floor.

I am oping to get 4cuf @ 30hz

I am thinking hard about 2 ZX350.2's they will give me between 175-200 per channel to play with. One for my subs, and one for my comps. I have a pretty cool plan based on the way my trunk is going to be shaped b/c of all my air ride stuff.

 

[Ptown_TSxxx 10+ year member]

What wrong with the new cadence amps?

 

[jkulysses 10+ year member]

What wrong with the new cadence amps?

I'd like to know to cause I haven't heard anything bad about them other then they are very long amps. Would be curious to see what the issue is with them.

 

[Audio Master 10+ year member]

would this do a 120x2 or a 220.2 they look similar to eacjh other its just size thats different i have a new one and a secod had one its STEG by the way

 

[Audio Master 10+ year member]

hellif you want i can do a second hand 310x2 it will get up to about 1400wrms i got two of them both just taken out of car like 4 days ago

 

[Anonymous 10+ year member]

Diamond D3400.1, strong little amp!

 

[thegreatestpenn 5,000+ posts]

rf t400-2 will do it. They don't claim it on their manual, but I ran mine at one ohm no problems

 

[frzninvt 10+ year member]

As suggested an Orion 225 HCCA (2nd or 3rd generation since they don't require the 400 BDG) will do 400W X 1 at 1 Ohm and a little more, only the most winningest amp in IASCA history

 

[Cbass 10+ year member]

Pg xenon 400.1 if you can get one....

I think there're some still avaliable on Ebay.

 

[mdillon 10+ year member]

Looking at SQL with two eD 12's glassed in a false floor.
I am oping to get 4cuf @ 30hz

I am thinking hard about 2 ZX350.2's they will give me between 175-200 per channel to play with. One for my subs, and one for my comps. I have a pretty cool plan based on the way my trunk is going to be shaped b/c of all my air ride stuff.

why dont you just get eD maybe a nine.1 or nine.2x

 

[Ptown_TSxxx 10+ year member]

Were there something going on about the cadence txa amps? does any one know? those just came out this year and they have already change to a newer line. They seem have great specs for the price too.