RE SR 10 wiring.

[mdereske 10+ year member]

Hey everyone. ANother stupid question from me. I'm looking at getting a RE SR10 4 ohm from woofersetc.com, and hooking it up to a Kicker ZX650.4 in few weeks. the ZX650.4 is rated at 325 W X2 at 4 ohm or 170 X 4 at 2 ohm. Could I wire one channel per coil? or just bridge 2 channels and turn the gains down. Not looking for huge loudness, just good clean, and slightly loud.

Or should I just say teh hell with the RE SR10, and pick something else up. Or Pick up a SR 10.d2 from Ikesound for 1/2 price and hook it up to 325 @ 4 ohm. I mean, that is the option that makes sense.

Click to read more...

 

[406er 10+ year member]

get a dual 2 10" SR and bridge the rear channles of that kicker amp, wich would feed the sub 325watts. then you could power up a set of front speaker with the remianing front to channles of that amp!

 

[mdereske 10+ year member]

That what I was thinking after a while. Just do it right, plus save about $100 over the 4 ohm.

 

[revrider1 5,000+ posts]

Hmmm