RE ported box design

[whitemdx 10+ year member]

I was wondering if anyone confirmed the accuracy of the ported box design on RE's website. I am building a slotted port for 1 RE MX 12", 2 ft^3 @ 33 hz. Displacement is .19 ft^3. Can someone verify these # are good to go:

Outer dimensions (will be using 3/4" MDF): 30L x 14H x 15D

port height = 12.5"

port width = 2.5"

total port length = 30"

net volume = 2.23 ft^3

Fb = 33.01 Hz

Click to read more...

 

[Doingstuffwell 10+ year member]

only 2 cubes?

hmmm. i dunno. im not an expert at boxes.

 

[whitemdx 10+ year member]

only 2 cubes?


hmmm. i dunno. im not an expert at boxes.

I went with RE recommendation, did a search here and couldn't pull up any user recommendation.

 

[whitemdx 10+ year member]

only 2 cubes?


hmmm. i dunno. im not an expert at boxes.

I went with RE's recommendation, did a search here and couldn't pull up any user recommendation.

 

[Doingstuffwell 10+ year member]

im just thinking of all the air you gotta move around in that car.

id think at LEAST 3 cubes?