Re-coning a MTX
- Thread starter Reddish Neck
- Start date
- Replies 0
- Views 924
-
- Tags
- cone jackhammer mtx
-
1Participant count
-
Participant list
-
Reddish Neck
Activity
No one is currently typing a reply...
Similar threads
You can just change the surround if the cone is not broken. This picture shows all the measurements you must make.
- Started by Bigjoncoop
- Subwoofers
Thanks buddy!
Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
- Started by Jodhvir Minhas
- Amplifiers
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
- Started by KarRamRod1999
- Subwoofers
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
- Started by It happens
- Amplifiers
In 1990:
The MTX MTA 225 had a MSRP of 549.95
25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8
The MTX MTA 250 had a MSRP of 649.95
50x2 0.02% THD S/N...
- Started by Courtbass
- Amplifiers
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 0
- Views
- 924
- Last reply date
- Last reply from
- Reddish Neck
