RD Audio, or MMats!?!?!?

alexmarzouca
10+ year member

Junior Member
I can get an RD Audio amp ( RD 3250 ) for a good deal. The guy said it SHOULD be fine with a kinetik hc1200 as an extra bat. it has a 300A fuse rating.

THe other would be a MMats 2000v2. 2000 watts at 2 ohms. it has a 100A fuse rating

I am running this in a 2006 bmw 325i, so another alternator is not an option for me. just another small bat.

the RD Audio is 375$, and the MMats is 500$

Which way should I go? I getting it by the end of the week.

 
I like the RD amp more, i'd be getting is from a member of this site, but I don't know if I can run it in my car. 300A fuse rating is massive for a little bmw. id be using it as a daily driver

 
I can get an RD Audio amp ( RD 3250 ) for a good deal. The guy said it SHOULD be fine with a kinetik hc1200 as an extra bat. it has a 300A fuse rating. THe other would be a MMats 2000v2. 2000 watts at 2 ohms. it has a 100A fuse rating

I am running this in a 2006 bmw 325i, so another alternator is not an option for me. just another small bat.

the RD Audio is 375$, and the MMats is 500$

Which way should I go? I getting it by the end of the week.
See if the RD is a V.1 ....if so get it....Zenon board....and that price is way too much IMO on the mmatts....also...what's your electrical consist of?

 
its the 3250v2. looks fairly new. im honestly not sure what size my alt. is. its a 06 325i, and I know they have a 120amp alt, so to be safe, I go with that. and I have a big, stock battery upfront. I was planning on getting a kinetik hc800, just to help out a bit

 
so out of the two, go with the Mmats then? id be getting 2000 watts@ 2 ohms, which is just what I need. The store said they'd install it and all that for free if I get the amp there. ( custom panels in the trunk I don't mess with )

 
so out of the two, go with the Mmats then? id be getting 2000 watts@ 2 ohms, which is just what I need. The store said they'd install it and all that for free if I get the amp there. ( custom panels in the trunk I don't mess with )
I'd choose the MMats over the RD but there are other options.

 
There are, but none has really stuck out to me. The Mmats seems like it will do the power I need, and not drain my electrical with out the bat, so with the bat. I should be more than good. which is exactly what i'd want. The fuse rating on the Mmats is almost too small.

 
Btw, if that mmats amp only has a 100 amp fuse, it would have to be 150% efficient to put out 2000 watts. And the RD has a history of amps going bad for no reason. Sooo.... buy something other than those two.

 
well that *****. I need about 1800@ 2 ohms, to give two dual 2 ohm subs 900 watts each. which is why id was getting such a big rd audio amp. it's about 1500 watts at 2 ohms, and the mmats is a 2 ohm amp. options are looking bad now

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

alexmarzouca

10+ year member
Junior Member
Thread starter
alexmarzouca
Joined
Location
Florida
Start date
Participants
Who Replied
Replies
28
Views
1,696
Last reply date
Last reply from
alexmarzouca
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top