rca plug broken inside of amp

[oneforyou 10+ year member]

Anybody have ideas of how to get it out. Have tried blowing it with compressorand vaccum. ????????

Click to read more...

 

[lyttleviet 10+ year member]

open it and push it through the other side? needle nose pliers?

 

[Pimpdaddyq 10+ year member]

open it and push it through the other side? needle nose pliers?

Yea I would try opening the amp up and getting it out that way.. seems to be the easiest route.. good luck..

Andrew

 

[oneforyou 10+ year member]

no opening to push something through on the other side. it is on a usa 4000d. I shine a small flashlight through and the light cannot be seen.

 

[djman37 5,000+ posts]

hey, look up http://www.omicronradio.com they're in Carrollton and fixed my Xtant rca jacks.

 

[Kriszilla 10+ year member]

Cut the end off of a Q-tip. Put a SMALL amount of superglue on the end. Put it in the hole and hold it against the broken piece with some light pressure for a minute. Let it cure for 5-10 mins, then pull it out.

Make sure you don't touch it to the sides. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[hemi=22s 10+ year member]

or jb quick weld on something like a paper clip and let it dry

 

[dB-r 10+ year member]

Not sure I understand why you can't take the cover off and push it back through.... Got a pic of the amp anywhere? Is it the 4000X?

 

[oneforyou 10+ year member]

internally you cannot even see the inside of the rca . it is a solid block made with a mixture of plastic and metal and is one solid peice.