"The box" for 2 tempests....

burn
10+ year member

Junior Member
Hey, i would really like to know what the size should be for the box for 2 tempests i'm going to be making.

I have read that it needs to be pretty big, and it must be ported. I want it tuned to 28hz for some sick low end, and i have around 9 or 10 cubic feet to work with. Not to mention that i want each sub in seperate chambers.

So if anyone can help me design a box for the subs, and help me calculate how big it needs to be, and how many ports i need and how big the ports need to be (since i'm new to this) it would be very very helpful.

thanks

 
I was told a minimum of 3.5 cubes for a single Tempest ...

I'd go 7 or 8 cubes with a lot of port, 50-100sq. in.

One question, why do you want them in seperate chambers?

- Steve

 
Well they would be built together... as one big box.... with a peice of wood in the middle seperating them... i read that if one blows than the other one could be damaged if they are both in one big box... if you understand what i mean...

do you have any slot port dimensions that i could use?

 
ok... i'll take your advice..

lets say i make the box 9 cubes.... where should i put the slot port and what should the dimensions be to make it 28-30hz?

 
If one blows, you'll know it, hit the pause or mute button, and go back and check ...
If you're stupid enough to try to play the surviving one at full volume despite the other one being blown, you deserve to have another blown sub //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

A single chamber is more forgiving, easier to build, and easier to design ...
why would you want a 9 cube box with no bracing //content.invisioncic.com/y282845/emoticons/nono.gif.eca61d170185779e0921b0faa9704973.gif

sepatare the chambers, it could use the support and then some

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

burn

10+ year member
Junior Member
Thread starter
burn
Joined
Location
Western New york
Start date
Participants
Who Replied
Replies
6
Views
483
Last reply date
Last reply from
russrocks
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top